% \iffalse meta-comment
%
% Copyright (C) 2025--26 Alan J. Cain
%
% This file may be distributed and/or modified under the conditions of the LaTeX Project Public License, either version
% 1.3c of this license or (at your option) any later version. The latest version of this license is in:
%
% http://www.latex-project.org/lppl.txt
%
% and version 1.3c or later is part of all distributions of LaTeX version 2008-05-04 or later.
%
% \fi
%
% \iffalse
%<*driver>
\PassOptionsToPackage{inline}{enumitem}
\documentclass{l3doc}


\makeatletter
\ExplSyntaxOn

\cs_gset:Npn \l@subsection { \@dottedtocline{2}{2.5em}{2.8em} }  % #2 = 1.5em
\cs_gset:Npn \l@subsubsection { \@dottedtocline{3}{5.3em}{3.5em} }  % #2 = 1.5em
\cs_gset:Npn \l@paragraph { \@dottedtocline{4}{8.8em}{3.2em} }  % #2 = 1.5em

\ExplSyntaxOff
\makeatother


\usepackage{xcolor}

\definecolor{linkcolor}{rgb}{0.0,0.4,0.7}
\colorlet{citecolor}{linkcolor}
\colorlet{urlcolor}{linkcolor}

\hypersetup{
  linkcolor=linkcolor,%
  citecolor=citecolor,%
  urlcolor=urlcolor,%
}
\usepackage{xurl}
\renewcommand*\UrlBigBreaks{}

\newcommand*\fullref[2]{%
  \hyperref[#2]{#1\penalty 200\ \ref*{#2}}%
}


\setcounter{tocdepth}{7}
\numberwithin{figure}{section}


\renewcommand*\topfraction{.8}


\usepackage{marginalia}


\renewcommand*\marginpar[1]{%
  \marginalia[
  pos=left,
  ysep=0pt,
  ysep page top=10mm,
  ysep page bottom=5mm,
  width=50mm,
  ]
  {#1}%
}


\usepackage{titleps}

\newpagestyle{sideheadings}[\normalfont]{
  \sethead{%
            \smash{%
              \marginalia[
                pos=left,
                valign=b,
                yshift={-\topskip-2\baselineskip},
                type=optfixed,
                xsep=2em,
                ysep={2\baselineskip},
                column=one,
                width=40mm,
              ]{%
                \raggedleft
                \itshape
                \large
                \sectiontitle
              }%
            }%
           }
          {}
          {}
  \setfoot{}
          {\thepage}
          {}
}





\usepackage{booktabs}
\usepackage{graphicx}


\newlist{vallist}{description}{1}
\setlist[vallist]{
  leftmargin=3em,
  style=unboxed,
  labelsep=1em,
  font=\descriptionitemcolon,
  nosep,
}

\newcommand*{\descriptionitemcolon}[1]{\kern 1em #1:}


\usepackage{siunitx}
\sisetup{
  mode=match,
}
\DeclareSIUnit\inch{in}
\DeclareSIUnit\point{pt}


\usepackage{tikz}
\usetikzlibrary{decorations.pathmorphing}


\newrobustcmd*\examplelabel[1]{%
  \smash{%
    \begin{tikzpicture}[baseline=(labelnode.base)]
      \node[node font=\sffamily\footnotesize] (labelnode) at (0,0) {#1};
      \draw[gray] (labelnode.center) circle (5pt);
    \end{tikzpicture}%
  }%
}


\usepackage{mathtools}

\DeclarePairedDelimiter{\abs}{\lvert}{\rvert}
\DeclarePairedDelimiter{\set}{\lbrace}{\rbrace}


\newcommand*\key[1]{\texttt{#1}}
\newcommand*\val[1]{\texttt{#1}}
\newcommand*\keyvalue[2]{\texttt{#1=#2}}

\NewDocumentCommand{\default}{ m }{(\textit{Default:} #1)}


\newcommand*\luafunc[1]{\texttt{#1}}
\newcommand*\luavar[1]{\texttt{#1}}


\usepackage{listings}

\lstset{
  language=[LaTeX]TeX,
  basicstyle=\small\ttfamily,
  basewidth=0.5em,
}



\newcounter{sidenote}
\NewDocumentCommand\sidenote{ m }{%
  \stepcounter{sidenote}%
  \textsuperscript{\thesidenote}%
  \marginalia[
    pos=left,
    style recto inner=\raggedright\footnotesize,
    width recto inner=35mm,
    xsep recto inner=10pt,
    ysep=5pt,
  ]{%
    \leavevmode\strut\llap{\thesidenote~}#1\strut%
  }%
}



\newcommand\TikZ{Ti\textit{k}Z}



\begin{document}

\DocInput{marginalia.dtx}

\PrintIndex

\end{document}
%</driver>
% \fi
%
%
%
% \GetFileInfo{marginalia.sty}
%
%
%
% \title{^^A
%   \pkg{marginalia} ^^A
%   --- Marginal content anywhere with automatic adjustment for Lua\LaTeX^^A
%   \texorpdfstring{\sidenote{This document\\describes \fileversion,\\last revised \filedate.}}{}^^A
% }
%
% \author{^^A
%   Alan J. Cain^^A
%   \texorpdfstring{\sidenote{\texttt{a.j.cain (AT) gmail.com}}}{}^^A
% }
%
% \date{Released \filedate}
%
% \maketitle
%
%
%
% \begin{abstract}
%   This Lua\LaTeX\ package allows the placement of marginal content anywhere, without \cs{marginpar}'s limits, and
%   automatically adjusts positions to prevent overlaps or content being pushed off the page, and offers key--value
%   settings that allow fine-grained customization.
% \end{abstract}
%
%
%
% \section*{Demonstration}
% \addcontentsline{toc}{section}{Demonstration}
%
% \begingroup
%
% \marginaliasetup{
%   style recto inner=\footnotesize\sffamily,
%   style recto outer=\raggedright\footnotesize\sffamily,
%   width recto inner=35mm,
%   width recto outer=15mm,
%   xsep recto inner=10pt,
%   xsep recto outer=13pt,
%   ysep=5pt,
% }
%
%
%   \noindent
%   The \pkg{marginalia} package permits intelligent placement of marginal content, such as notes.^^A
%   \marginalia{(Like this one.)}
%   This page demonstrates some of its capabilities.
%
%   Key--value options allow global or local settings of the style, width, placement, and spacing of marginal content.
%   In particular, styles and widths can be specified globally depending on the margin in which the content is placed;
%   the correct style or width will be selected for each item. For example, in this demonstration,
%   \qty{15}{\milli\metre}-wide ragged-right sans-serif has been specified globally as the default for items in the
%   right margin and \qty{35}{\milli\metre}-wide justified sans-serif for items in the left margin. Note that the
%   vertical position of items is adjusted automatically to avoid overlaps, but there is an option to specify that items
%   have fixed positions.^^A
%   \marginalia[pos=left]{By default, this marginal note would have its top line aligned with
%   the last line of the adjacent paragraph, but it has been automatically moved upwards to avoid clashing with the
%   figure caption below, which has been set with an option that fixes its position.}^^A
%   \marginalia[valign=t]{Notes can be placed on both sides of the paragraph.}^^A
%
%   \begin{figure}[h]^^A
%     \centering
%     \begin{tikzpicture}
%       \node[
%       minimum width={\textwidth-.4pt},
%       minimum height=30mm,
%       draw,
%       fill=lightgray!50!white,
%       rounded corners,
%       align=center,
%       ] at (0,0) {{\Large A demonstration of \pkg{marginalia}.}\\[2pt](This is a \texttt{figure} enviroment.)};
%     \end{tikzpicture}^^A
%     \marginalia[valign=b,pos=left,style=\small,type=fixed]{{\raggedleft\textbf{Figure~0}\par}\pkg{marginalia} can
%     place content alongside floats, so it can be used to place float captions in the margin. (Here, the text style has
%     been locally switched to Roman.)}^^A
%   \end{figure}
%
%   Unlike the usual \cs{marginpar} command,^^A
%   \marginalia[pos=left,mark={{
%     \begin{tikzpicture}[xscale=-1,scale=.1,baseline=-2.5pt]
%       \fill[blue!70!black] (60:1) -- (180:1) -- (-60:1) -- cycle;
%     \end{tikzpicture}
%   }}]{This is a top-aligned margin item pointing to the relevant line of text.}
%     \pkg{marginalia} allows marginal content to be placed next to floats, footnotes, or the page head or footer.
%   ‘Marks’ can also be added pointing to the relevant line of text^^A
%   \marginalia[valign=m,mark={{
%     \begin{tikzpicture}[scale=.15,baseline=-2.5pt]
%      \fill[red!70!black] (60:1) -- (180:1) -- (-60:1) -- cycle;
%     \end{tikzpicture}
%   }}]{This is a middle-aligned margin item pointing to the relevant line of text.}
%   and there are various vertical alignment options.
%
%   The automatic adjustment of the vertical positions of items will not result in items being closer than specified
%   distances from the top or bottom of the page (unless there is actually insufficient space to place the items).^^A
%   \marginalia[pos=left,ysep page bottom=10mm,width=25mm,style=\raggedleft\footnotesize\sffamily,mark={{
%     \begin{tikzpicture}[xscale=-1,scale=.1,baseline=-2.5pt]
%       \fill[blue!70!black] (60:1) -- (180:1) -- (-60:1) -- cycle;
%     \end{tikzpicture}
%   }}]{^^A
%     This marginal note, the width and style of which have locally been set to \qty{25}{mm} and ragged left, would by
%     default have its top line aligned with the last line of the adjacent paragraph, but it has been moved upwards to
%     maintain a minimum distance of \qty{10}{mm} from the bottom of the page.^^A
%   }
% \endgroup
%
%
%
% \clearpage
% \tableofcontents
%
%
%
% \begin{documentation}
%
%
%
% \section{Introduction}
% \pagestyle{sideheadings}
%
% The \LaTeX\ \cs{marginpar} command is the basic method for placing content in the margin. For purposes such as drawing
% attention to particular points in the text, it functions well. Its main limitation is that \cs{marginpar} works via
% the \LaTeX\ float mechanism and so cannot be used to create marginal content next to a figure, table, or other float,
% or next to a footnote, or to place running heads in the margin, such as are found in the left-hand margin of this
% document except for the `implementation' section. (Bringhurst called this style `running shoulder\-heads'
% \cite[p.~65]{bringhurst_elements}, but the term may be non-standard.)
%
% Trying to set many separate pieces of marginal content using \cs{marginpar} can lead to other problems. If two
% \texttt{marginpar}s would clash, \LaTeX\ shifts the second item downward. But the cumulative effect can lead to
% \texttt{marginpar}s being shifted downward off the bottom of the page. Further, the asynchronous nature of \TeX's
% page-breaking can cause:
% \begin{enumerate*}[label={(\arabic*)}]
%   \item a \texttt{marginpar} to be placed in the wrong margin;
%   \item the topmost \texttt{marginpar} on a page to be unnecessarily shifted downward because of a hypothetical clash
%   that would have occured with the previous \texttt{marginpar}, had they been on the same page.
% \end{enumerate*}
%
% Packages like \pkg{mparhack}\sidenote{\textsc{url:} \url{https://ctan.org/pkg/mparhack}} (Tom Sgouros \& Stefan
% Ulrich), \pkg{marginnote}\sidenote{\textsc{url}: \url{https://ctan.org/pkg/marginnote}} (Markus Kohm),
% \pkg{marginfix}\sidenote{\textsc{url:} \url{https://ctan.org/pkg/marginfix}} (Stephen Hicks) and
% \pkg{marginfit}\sidenote{\textsc{url:} \url{https://ctan.org/pkg/marginfit}} (Maurice Leclaire) were created to avoid
% these limitations and problems. \pkg{mparhack} only ensures that each \texttt{marginpar} appears on the correct side
% of the page. \pkg{marginnote} allows marginal content to be placed anywhere, but does not adjust positions to avoid
% clashes. \pkg{marginfix} adjusts positions, but the unadjusted vertical positioning can be slightly off, and the
% package still uses floats. \pkg{marginfit} gets positions exactly right, but uses the insert mechanism and so marginal
% content cannot appear next to floats or footnotes.
%
% This Lua\LaTeX\ package, \pkg{marginalia}, provides a \cs{marginalia} command that attempts to avoid these
% limitations. Marginal content is placed, not via floats or inserts, but by a calculated per-item horizontal shift
% inside an (invisible) \cs{rlap} or \cs{llap} from the position where the \cs{marginalia} command was issued (which is
% similar to the technique used by \pkg{marginnote}), plus a calculated per-item vertical shift to avoid clashes with
% other content. The vertical shift is usually downward, but may be upward when necessary to prevent content from being
% shifted off the bottom of the page (which is similar to the vertical shifts performed by \pkg{marginfix} and
% \pkg{marginfit}).
%
% The calculation of the horizontal and vertical shifts uses information written to the \file{.aux} file during the
% previous Lua\LaTeX\ run. It thus takes at least two runs for all content to appear in the correct places. The package
% reports any changes from the previous run and any problems encountered.
%
% \bigskip
%
% \noindent\emph{Note:} \pkg{marginalia} was written to typeset running heads in the margin, sidenote references,
% side-captions for floats, and small marginal figures in the author's book \textit{Form \& Number: A History of
% Mathematical Beauty} \cite{cain_formandnumber_ebook_large}.\sidenote{\textit{Form \& Number} is freely available on
% the Internet Archive under a Creative Commons licence.
% \textsc{url}:~\url{https://archive.org/details/cain_formandnumber_ebook_large}} Thus the basic functionality has been
% tested extensively, and it has performed correctly.
%
%
%
% \paragraph*{Licence.} \noindent\pkg{marginalia} is released under the \LaTeX\ Project Public Licence v1.3c or
% later.\sidenote{\textsc{url}: \url{https://www.latex-project.org/lppl.txt}}
%
%
%
% \paragraph*{Acknowledgements.} The author thanks Ulrike Fischer for explaining how to add tagging support, and Julien
% Labbé and François Pantigny for some valuable suggestions.
%
%
%
% \paragraph*{Translation.} A French translation of the documentation has been made by members of GUTenberg (Le~Groupe
% francophone des Utilisateurs de \TeX).\sidenote{\textsc{url}:
% \url{https://gitlab.gutenberg-asso.fr/gutenberg/traduction-de-marginalia/}}
%
%
%
% \paragraph*{Feature requests and bug reports}
%
% The development code and issue tracker are hosted at Codeberg.\sidenote{\textsc{url}:
% \url{https://codeberg.org/ajcain/marginalia}}
%
%
%
% \paragraph*{Other resources.} An introduction to \pkg{marginalia} has appeared in \textit{TUGboat} \cite{c_marginalia}.
%
%
%
% \section{Requirements}
%
% \pkg{marginalia} requires
% \begin{enumerate}[label={(\arabic*)}]
%   \item Lua\LaTeX,
%   \item a recent \LaTeX\ kernel with \pkg{expl3} support (any kernel version since 2020-02-02 should suffice).
% \end{enumerate}
% It does not depend on any other packages.
%
%
%
% \section{Installation}
%
% To install \pkg{marginalia} manually, run \texttt{luatex marginalia.ins} and copy \texttt{marginalia.sty} and
% \texttt{marginalia.lua} to somewhere Lua\LaTeX\ can find them.
%
%
%
% \section{Getting started}
%
% \pkg{marginalia} works `out of the box'. Load the package (there are no package options) and use the main
% \cs{marginalia} command to place marginal content. \fullref{Figure}{fig:example-getting-started} shows the source code
% for a small demonstration and the resulting document. \emph{The source code must be processed \textsl{twice} by
% Lua\LaTeX\ for the marginal content to be placed correctly.} (See \fullref{Subsection}{sec:multiple-runs} for
% discussion of the need for multiple runs.)
%
% \begin{figure}[t]
%   \lstinputlisting{marginalia-doc-example-getting-started.tex}
%   \begin{tikzpicture}
%     \pgfmathsetmacro{\s}{(\textwidth+.4pt)/210mm}
%     \pgfmathsetlengthmacro{\w}{\s*210mm}
%     \pgfmathsetlengthmacro{\h}{\s*110mm}
%     \path[save path=\outline] (0,0) -| ++(\w,-\h) -| cycle;
%     \begin{scope}
%       \clip[use path=\outline];
%       \node[anchor=north west,inner sep=0] at (0,0)
%         {\includegraphics[scale=\s]{marginalia-doc-example-getting-started.pdf}};
%     \end{scope}
%     \draw[gray,use path=\outline];
%   \end{tikzpicture}
%
%   \caption{A small demonstration of \pkg{marginalia}.}
%   \label{fig:example-getting-started}
% \end{figure}
%
% Turn to \fullref{Section}{sec:commands} for a detailed description of the available user commands, and
% \fullref{Section}{sec:options} for the various options (such as \keyvalue{style}{\meta{code}}) that can be used to
% change the placement and formatting of the marginal content.
%
%
%
% \section{User commands}
% \label{sec:commands}
%
% \begin{function}{\marginalia}
%   \begin{syntax}
%     \cs{marginalia}\oarg{options}\marg{content}
%   \end{syntax}
%   This is the basic command for placing marginal content. The \meta{content} can, roughly speaking, be anything: text,
%   mathematics, included graphics, \TikZ. The optional argument \meta{options} is a key--value list that
%   specifies how the content is typeset. The keys are described in \fullref{Section}{sec:options}.
% \end{function}
%
%
%
% \begin{function}{\marginaliasetup}
%   \begin{syntax}
%     \cs{marginaliasetup}\marg{options}
%   \end{syntax}
%   This command is used to set options for subsequent calls to \cs{marginalia}. The argument \meta{options} is the same
%   kind of key--value list as the \meta{options} argument for the \cs{marginalia} command, and the keys are described
%   in \fullref{Subsection}{sec:options}.
%
%   Note that \cs{marginaliasetup} can be used in the preamble or in the body of the document. Options set using
%   \cs{marginaliasetup} have effect only within the current group.
% \end{function}
%
%
%
% \begin{function}{\marginalianewgeometry}
%   \begin{syntax}
%     \cs{marginalianewgeometry}
%   \end{syntax}
%   This command signals to \pkg{marginalia} that the page layout has been changed, for instance by using the
%   \cs{newgeometry} command from the \pkg{geometry} package,\sidenote{\textsc{url}:
%   \url{https://ctan.org/pkg/geometry}} or by using the \LaTeX\ command \cs{twocolumn} to switch to two-column mode. It
%   should be issued immediately after such a change, and certainly before the first page with the new layout has been
%   shipped out. There is no harm in using it unnecessarily.
% \end{function}
%
%
%
% \subsection{Access to page and column}
%
% Within the \meta{content} of \cs{marginalia}, two counters are available which specify the actual page and column in
% which the call to \cs{marginalia} appears. These counters can be used to select different actions depending on the
% page on which the content appears or (in two-column mode) whether it pertains to the left or right column. It is best
% to use the variants of the \key{style} and \key{width} keys if marginal content should have different widths or styles
% depending on whether they appear on a recto/verso page or pertain to a particular column. These counters are made
% available for purposes not covered by the \key{style} and \key{width} variants. The value of each counter is based on
% the position of the call to \cs{marginalia} on the previous Lua\LaTeX\ run.
%
% \begin{variable}{\marginaliapage}
%   A counter register, available within the \meta{content} of \cs{marginalia}, that holds the actual page on which the
%   marginal content appears. The value is based on the previous Lua\LaTeX\ run and will default to \(1\).
% \end{variable}
%
% \begin{variable}{\marginaliacolumn}
%   A counter register, available within the \meta{content} of \cs{marginalia}, that holds the actual column to which
%   the marginal content pertains. The value is \(1\) for the left column, \(2\) for the right column. In one-column
%   mode, the value is always \(0\). (If the key \key{column} is used to manually specify the column to which the
%   content pertains, the value of \cs{marginaliacolumn} will change accordingly.) The value is based on the previous
%   Lua\LaTeX\ run and will default to \(0\).
% \end{variable}
%
% ^^A Hack: need to manually deactivate page heading here, since the "function" environment does not use marginalia.
% \thispagestyle{plain}
%
%
%
% \section{Options}
% \label{sec:options}
%
% The description of keys in this section, which are summarized in \fullref{Tables}{tbl:keys-type-position} and
% \ref{tbl:keys-appearance} (on pages \pageref{tbl:keys-type-position} and \pageref{tbl:keys-appearance} respectively),
% should be read in conjunction with the discussion of how marginal content is placed in
% \fullref{Section}{sec:placement}. In particular, the variants of the keys \key{style}, \key{width}, and \key{mark}
% follow the terminology shown in \fullref{Figure}{fig:terminology}.
%
% Note that the initial values of the various keys that take dimensions (namely \key{width}\ldots, \key{xsep}\ldots,
% \key{ysep}\ldots) are assigned at \cs{begin}\texttt{\{}\env{document}\texttt{\}}. Thus their defaults are determined
% by the values of \cs{marginparwidth}, \cs{marginparsep}, \cs{marginparpush} and the page layout at
% \cs{begin}\texttt{\{}\env{document}\texttt{\}}, \emph{not} at package load time. Similarly, if the user sets these
% keys in the preamble, the assignment is evaluated at \cs{begin}\texttt{\{}\env{document}\texttt{\}}. For example,
% using \cs{marginaliasetup}\texttt{\{\key{width}=.5\cs{oddsidemargin}\}} in the preamble results in the \key{width} key
% being set to half the value of \cs{oddsidemargin} at \cs{begin}\texttt{\{}\env{document}\texttt{\}}, \emph{not} to
% half the value of \cs{oddsidemargin} at the call to \cs{marginaliasetup}.
%
% \begin{table}[p]
%   \caption{Summary of keys affecting the type and position of the marginal content. (For keys affecting the appearance
%   of marginal content, see \fullref{Table}{tbl:keys-appearance}.) All keys can be set using \cs{marginaliasetup} or
%   passed in the optional argument to \cs{marginalia}.}
%   \label{tbl:keys-type-position}
%   \leavevmode\strut\kern\hsize
%   \llap{^^A
%   \begin{tabular*}{\hsize+30mm}{p{50mm}p{60mm}l}
%     \toprule
%     Key name                          & Value                                                 & Default                   \\
%     \midrule
%     \key{type}                        & \(\set{\val{normal},\val{fixed},\val{optfixed}}\)     & \val{normal}              \\
%     \midrule
%     \key{pos}                         & \(\set{\val{auto},\val{reverse},\val{left},
%                                           \val{right},\val{nearest}}\)                        & \val{auto}                \\
%     \key{column}                      & \(\set{\val{auto},\val{one},\val{left},\val{right}}\) & \val{auto}                \\
%     \key{xsep recto right}            & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep recto left}             & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep verso right}            & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep verso left}             & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep right between}          & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep left between}           & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep recto outer}            & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep recto inner}            & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep verso outer}            & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep verso inner}            & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep}                        & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep between}                & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep outer}                  & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \key{xsep inner}                  & Dimension                                             & \val{\cs{marginparsep}}   \\
%     \midrule
%     \key{valign}                      & \(\set{\val{t},\val{b},\val{c},\val{m}}\)             & \val{t}                   \\
%     \key{yshift}                      & Dimension                                             & \qty{0}{\point}           \\
%     \key{ysep}                        & Dimension                                             & \val{\cs{marginparpush}}  \\
%     \key{ysep above below}            & Dimension                                             & \val{\cs{marginparpush}}  \\
%     \key{ysep above}                  & Dimension                                             & \val{\cs{marginparpush}}  \\
%     \key{ysep below}                  & Dimension                                             & \val{\cs{marginparpush}}  \\
%     \key{ysep page top}               & Dimension                                             & [Margin above textblock]  \\
%     \key{ysep page bottom}            & Dimension                                             & [Margin below textblock]  \\
%     \key{ysep page top margin}        & [None]                                                & ---                       \\
%     \key{ysep page bottom margin}     & [None]                                                & ---                       \\
%     \key{ysep page top bottom margin} & [None]                                                & ---                       \\
%     \bottomrule
%   \end{tabular*}^^A
%   }
% \end{table}
%
%
%
% \subsection{Document orientation}
%
% \DescribeOption{binding side} The side of a recto page on which the document is bound and which is thus the
% ‘inner’ margin of a recto page. It can take the values \val{left} (the normal for books written in left-to-right
% languages, such as European languages) and \val{right} (the normal for books written in right-to-left languages, such
% as Arabic or Hebrew). \emph{This option can only be set in the preamble.} \default{\val{left}}
%
% Options which involve the term \key{outer} and \key{inner} are affected by the value of \key{binding side}. If
% \keyvalue{binding side}{left}, then \key{outer} refers to the right-hand margin of recto pages and to the
% left-hand margin of verso pages. If \keyvalue{binding side}{right}, then \key{outer} refers to the left-hand
% margin of recto pages and to the right-hand margin of verso pages.
%
% For example: if \keyvalue{binding side}{left}, then setting \key{width recto outer} has the same effect as setting
% \key{width recto right}; if \keyvalue{binding side}{right} then setting \key{width recto outer} has the same effect as
% setting \key{width recto left}.
%
%
%
% \subsection{Type}
%
% \DescribeOption{type} The \key{type} of an item of marginal content can be set to one of the following three values:
% \begin{vallist}
%   \item[\val{normal}] The vertical position of the item will be changed automatically if necessary to prevent a clash
%   with another item of content.
%   \item[\val{fixed}] The vertical position of the item will \emph{never} be changed automatically from the position
%   specified by \key{yshift}, even if there is a clash with another item. (The type \val{fixed} was designed for
%   setting float captions in the margin, since a caption should not move away from the float with which it is
%   associated.)
%   \item[\val{optfixed}] The vertical position of the item will \emph{never} be changed automatically from the position
%   specified by \key{yshift}, even if there is a clash with another item. But an \val{optfixed} item will not appear in
%   the document if it would clash with a \val{fixed} item. (The type \val{optfixed} was designed for setting running
%   heads in the margin, which should not appear if they would clash with a figure caption set in the margin.)
% \end{vallist}
% \default{\val{normal}}
%
%
%
% \subsection{Horizontal placement}
%
% \DescribeOption{pos} The position in which an item of marginal content should be placed. It can be set to one of the
% the following seven values:
% \begin{vallist}
%   \item[\val{auto}] Place the item in the default position as described in \fullref{Section}{sec:placement}: the outer
%   margin in single-column mode, and on the opposite side from the other column in two-column mode.
%   \item[\val{reverse}] Place the item on the opposite side of the text block (in one-column mode) or column (in
%   two-column mode) from \val{auto}.
%   \item[\val{outer}] The outer side of the text block or column.
%   \item[\val{inner}] The inner side of the text block or column.
%   \item[\val{right}] The right side of the text block or column.
%   \item[\val{left}] The left side of the text block or column.
%   \item[\val{nearest}] The side of the text block or column nearest to which \cs{marginalia} was called.
% \end{vallist}
% \default{\val{auto}}
%
% The values \val{auto}, \val{reverse}, \val{outer}, and \val{inner} are affected by the key \key{binding side}. The
% value \val{outer} means ‘the opposite side of the page from the binding’ and the value \val{inner} means ‘the same
% side of the page as the binding’.
%
% Similarly, in one-column mode, the value \val{auto} places the item in the margin on the opposite side of the page
% from the binding. In two-column mode, \val{auto} places the item in the margin on the opposite side from the other
% column, regardless of the value of \key{binding side}. The value \val{reverse} always the places the item in the on
% the opposite side of the text block or column from \val{auto}.
%
% The values \val{right}, \val{left}, and \val{nearest} are \emph{not} affected \key{binding side}.
%
%
%
% \medskip\goodbreak
%
%
% \DescribeOption{column} In two-column mode, \pkg{marginalia} tries to determine to which column an item of marginal
% content pertains using the position of the call to \cs{marginalia}. If the call is to the left of the mid-point
% between the columns, the item is assumed to pertain to the left column; otherwise, it is assumed to pertain to the
% right column. In certain situations, this might lead to undesired placement of the item. In particular, any call to
% \cs{marginalia} in a full-width float in two-column mode would be handled as if it were a call from one of the columns
% and might thus be set in the wrong place. Similarly, an overfull hbox or a piece of \cs{rlap}-ped text might carry a
% call to \cs{marginalia} from the left column text into the area of the page occupied by the right column.
%
% The key \key{column} can be used to specify which column \pkg{marginalia} should place the item in. It can be set to
% one of four values:
% \begin{vallist}
%   \item[\val{auto}] Automatically determine which column an item of marginal content is placed in.
%   \item[\val{one}] Treat the item as being called from one-column mode.
%   \item[\val{left}] Treat the item as pertaining to the left column.
%   \item[\val{right}] Treat the item as pertaining to the right column.
% \end{vallist}
% The value of \key{column} has no effect in one-column mode. \default{\val{auto}}
%
%
% \medskip\goodbreak
%
%
% \DescribeOption{xsep recto right}
% \DescribeOption{xsep recto left}
% \DescribeOption{xsep verso right}
% \DescribeOption{xsep verso left}
% \DescribeOption{xsep right between}
% \DescribeOption{xsep left between}
% These keys specify the horizontal separation between an item of marginal content and the text block next
% to which it is placed. Which separation is used will depend on where the item is typeset. The terminology is as
% in \fullref{Figure}{fig:terminology}.
% \begin{vallist}
%   \item[\key{xsep recto right}] used for an item in the right margin of a recto page.
%   \item[\key{xsep recto left}] used for an item in the left margin of a recto page.
%   \item[\key{xsep verso right}] used for an item in the right margin of a verso page.
%   \item[\key{xsep verso left}] used for an item in the left margin of a verso page.
%   \item[\key{xsep right between}] used for an item set from the right column between the columns.
%   \item[\key{xsep left between}] used for an item set from the left column between the columns.
% \end{vallist}
%
% \DescribeOption{xsep recto outer}
% \DescribeOption{xsep recto inner}
% \DescribeOption{xsep verso outer}
% \DescribeOption{xsep verso inner}
% These alternative keys similarly specify the horizontal separation between an item of marginal content and the text
% block. The \key{inner} keys apply to the margin where the binding is (as specified by \key{binding side}) and the the
% \key{outer} keys apply to the opposite margin. Setting each of these keys has the same effect as setting the
% corresponding \key{right}/\key{left} key listed above. (See the documentation of \key{binding side} for further
% details of how \key{outer}/\key{inner} correspond to \key{right}/\key{left}.)
% \begin{vallist}
%   \item[\key{xsep recto outer}] used for an item in the outer margin of a recto page.
%   \item[\key{xsep recto inner}] used for an item in the inner margin of a recto page.
%   \item[\key{xsep verso outer}] used for an item in the outer margin of a verso page.
%   \item[\key{xsep verso inner}] used for an item in the inner margin of a verso page.
% \end{vallist}
%
% \DescribeOption{xsep}
% \DescribeOption{xsep between}
% \DescribeOption{xsep outer}
% \DescribeOption{xsep inner}
% These keys are shortcuts for setting more than one of the above keys simulateously.
% \begin{vallist}
%   \item[\key{xsep}] a shorthand for setting all of the \key{xsep}\ldots\ simultaneously.
%   \item[\key{xsep between}] a shorthand for setting the keys \key{xsep right between} and \key{xsep left between}
%   simultaneously to the same value.
%   \item[\key{xsep outer}] a shorthand for setting the keys \key{xsep recto outer} and \key{xsep verso outer}
%   simultaneously to the same value.
%   \item[\key{xsep inner}] a shorthand for setting the keys \key{xsep recto inner} and \key{xsep verso inner}
%   simultaneously to the same value.
% \end{vallist}
% (The shorthands \key{xsep outer} and \key{xsep inner} exist because page geometry is usually symmetrical between recto
% and verso pages as regards outer and inner margins. The shorthand \key{xsep between} exists because the space between
% columns, if used at all for marginal content, will often be shared equally.) Each of these keys must be set to a valid
% dimension. \default{value of \cs{marginparsep} at \cs{begin}\texttt{\{}\env{document}\texttt{\}}}
%
%
%
% \subsection{Vertical placement}
%
% \DescribeOption{valign} This key specifies the vertical alignment of the marginal content item, before any
% \key{yshift} or automatic adjustment is applied. It can be set to one of the following three values:
% \begin{vallist}
%
%   \item[\val{t}] The baseline of the marginal content item is the baseline of the topmost box in its contents. Thus,
%   if no \key{yshift} is specified and there is no automatic adjustment, the baseline of the topmost box of the
%   marginal content will be vertically aligned with the line where the call to \cs{marginalia} is located.
%
%   \item[\val{b}] The baseline of the marginal content item is the baseline of the bottommost box in its contents.
%   Thus, if no \key{yshift} is specified and there is no automatic adjustment, the baseline of the bottommost box of
%   the marginal content will be vertically aligned with the line where the call to \cs{marginalia} is located.
%
%   \item[\val{c}] The baseline of the marginal content item will be placed centrally between top and bottom of the
%   contents as a whole.
%
%   \item[\val{m}] The baseline of the marginal content item will be midway between the baselines of the topmost and
%   bottommost boxes in its contents. Thus, if the marginal content comprises an \emph{odd} number of
%   \emph{equally-spaced} lines, the baseline of the middle line will be vertically aligned with the line where the call
%   to \cs{marginalia} is located.
%
% \end{vallist}
% These values are illustrated in \fullref{Figure}{fig:example-valign} If \keyvalue{type}{normal}, then the alignments
% described above for \val{t}, \val{b}, \val{m} may not hold because of automatic adjustment. \default{\val{t}}
%
% \begin{figure}[p]
%   \lstinputlisting{marginalia-doc-example-valign.tex}
%   \begin{tikzpicture}
%     \pgfmathsetmacro{\s}{(\textwidth+.4pt)/210mm}
%     \pgfmathsetlengthmacro{\w}{\s*210mm}
%     \pgfmathsetlengthmacro{\h}{\s*110mm}
%     \path[save path=\outline] (0,0) -| ++(\w,-\h) -| cycle;
%     \begin{scope}
%       \clip[use path=\outline];
%       \node[anchor=north west,inner sep=0] at (0,0) {\includegraphics[scale=\s]{marginalia-doc-example-valign.pdf}};
%     \end{scope}
%     \draw[gray,use path=\outline];
%   \end{tikzpicture}
%
%   \caption{A demonstration of the various values of \key{valign}.}
%   \label{fig:example-valign}
% \end{figure}
%
% The option \keyvalue{valign}{c} may be useful if the marginal content contains a picture, which would sit on a single
% oversized line. Conversely, the option \keyvalue{valign}{m} may be useful if one is wants textual alignment with the
% body text.
%
%
% \medskip\goodbreak
%
%
% \DescribeOption{yshift}
% The key \key{yshift} is used to shift the default position of the marginal content item up (positive) or
% down (negative) from its normal position, which is to have its baseline aligned with the baseline of the callout
% position. It must be set to a valid dimension. Note that if \keyvalue{type}{normal}, then the vertical
% position may be adjusted from that specified by \key{yshift}. If this is not desired, specify a different \key{type}.
% \default{0pt}.
%
%
% \medskip\goodbreak
%
%
% \DescribeOption{ysep}
% \DescribeOption{ysep above}
% \DescribeOption{ysep below}
% \DescribeOption{ysep page top}
% \DescribeOption{ysep page bottom}
% These keys specify the minimum vertical separation above and below an item of marginal content
% (see \fullref{Figure}{fig:ysep-explanation}).
% \begin{vallist}
%   \item[\key{ysep above}] the minimum vertical separation between an item and the one above.
%     \default{value of \cs{marginparpush} at \cs{begin}\texttt{\{}\env{document}\texttt{\}}}
%   \item[\key{ysep below}] the minimum vertical separation between an item and the one below.
%     \default{value of \cs{marginparpush} at \cs{begin}\texttt{\{}\env{document}\texttt{\}}}
%   \item[\key{ysep page top}] the minimum vertical separation between an item and top of the page.
%     \default{margin above main textblock at \cs{begin}\texttt{\{}\env{document}\texttt{\}}}
%   \item[\key{ysep page bottom}] the minimum vertical separation between an item and bottom of the page.
%     \default{margin below main textblock at \cs{begin}\texttt{\{}\env{document}\texttt{\}}}
%   \item[\key{ysep above below}] is a shorthand for setting both \key{ysep above} and \key{ysep below} simultaneously
%      to the same value.
%   \item[\key{ysep}] is a shorthand for setting all of these keys simultaneously to the same value.
% \end{vallist}
% Each of these keys must be set to a valid dimension. \default{value of \cs{marginparpush} at
% \cs{begin}\texttt{\{}\env{document}\texttt{\}}}
%
% \begin{figure}[t]
%   \centering
%   \includegraphics{marginalia-doc-ysep-explanation.pdf}
%   \caption{(Illustration of \key{ysep}) The length \examplelabel{1} is at least the value of \key{ysep below}
%   specified (locally or globally) for marginal content item \examplelabel{A} and at least the value of \key{ysep
%   above} specified for item \examplelabel{B}. In this example diagram, \examplelabel{B} has been automatically moved
%   down from its natural position to maintain the required distance. Similarly, the length \examplelabel{2} is at least
%   the value of \key{ysep below} specified for \examplelabel{C} and at least the value of \key{ysep above} specified
%   for \examplelabel{D}, and the length \examplelabel{3} is at least the value of \key{ysep page bottom} specified for
%   \examplelabel{D}. In this example, to maintain the required distances, \examplelabel{C} and \examplelabel{D} have
%   been automatically moved (respectively) up and down from their natural positions.}
%   \label{fig:ysep-explanation}
% \end{figure}
%
% \medskip\goodbreak
%
% \DescribeOption{ysep page top margin}
% \DescribeOption{ysep page bottom margin}
% \DescribeOption{ysep page top bottom~margin}
% These keys automatically set vertical separation between an item of marginal content and the top and bottom of the
% page to match the main textblock.
% \begin{vallist}
%   \item[\key{ysep page top margin}] Automatically set \key{ysep page top} to match the margins above the main
%   textblock; to be precise, \key{ysep page top} is set to the value of
%   \(\qty{1}{\inch} + \cs{voffset} + \cs{topmargin} + \cs{headheight} + \cs{headsep}\).
%   \item[\key{ysep page bottom margin}] Automatically set \key{ysep page bottom} to match the margins above the main
%   textblock; to be precise, \key{ysep page bottom} is set to the value of
%   \(\cs{paperheight} - (\qty{1}{\inch} + \cs{voffset} + \cs{topmargin} + \cs{headheight} + \cs{headsep}) - \cs{textheight}\).
%   \item[\key{ysep page top bottom margin}] Automatically set \key{ysep page top} and \key{ysep page bottom} to match
%   the margins above and below the main textblock; has the same effect as specifying \key{ysep page top margin} and
%   \key{ysep page bottom margin} separately.
% \end{vallist}
% None of these keys takes a value. Note that if the sizes of the top and bottom margins are changed, the values of
% \key{ysep page top} and \key{ysep page bottom} do not change automatically, even if these options have been used. The
% options can of course be used immediately after the new margins have be set.
%
%
%
% \subsection{Appearance}
%
% \begin{table}[p]
%   \caption{Summary of keys affecting the appearance of the marginal content. (For keys affecting the type or position
%   of marginal content, see \fullref{Table}{tbl:keys-type-position}.) All keys can be set using \cs{marginaliasetup} or
%   passed in the optional argument to \cs{marginalia}.}
%   \label{tbl:keys-appearance}
%   \leavevmode\strut\kern\hsize
%   \llap{^^A
%   \begin{tabular*}{\hsize+30mm}{p{50mm}p{60mm}l}
%     \toprule
%     Key name                          & Value                                                 & Default                   \\
%     \midrule
%     \key{width recto right}           & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width recto left}            & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width verso right}           & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width verso left}            & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width right between}         & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width left between}          & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width recto outer}           & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width recto inner}           & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width verso outer}           & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width verso inner}           & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width}                       & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width between}               & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width outer}                 & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \key{width inner}                 & Dimension                                             & \val{\cs{marginparwidth}} \\
%     \midrule
%     \key{style recto right}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{style recto left}            & \LaTeX\ code                                          & [Empty]                   \\
%     \key{style verso right}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{style verso left}            & \LaTeX\ code                                          & [Empty]                   \\
%     \key{style right between}         & \LaTeX\ code                                          & [Empty]                   \\
%     \key{style left between}          & \LaTeX\ code                                          & [Empty]                   \\
%     \key{style recto outer}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{style recto inner}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{style verso outer}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{style verso inner}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{style}                       & \LaTeX\ code                                          & [Empty]                   \\
%     \midrule
%     \key{mark recto right}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{mark recto left}            & \LaTeX\ code                                          & [Empty]                   \\
%     \key{mark verso right}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{mark verso left}            & \LaTeX\ code                                          & [Empty]                   \\
%     \key{mark right between}         & \LaTeX\ code                                          & [Empty]                   \\
%     \key{mark left between}          & \LaTeX\ code                                          & [Empty]                   \\
%     \key{mark recto outer}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{mark recto inner}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{mark verso outer}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{mark verso inner}           & \LaTeX\ code                                          & [Empty]                   \\
%     \key{mark}                       & \LaTeX\ code                                          & [Empty]                   \\
%     \bottomrule
%   \end{tabular*}^^A
%   }
% \end{table}
%
% An item of marginal content that appears in the inner margin might be narrower than one that appears in the outer
% margin, and an item appearing in the outer margin of a recto page might be set ragged right, while an item appearing
% in the outer margin of a verso page might be set ragged left. And since it is not known where an item will appear
% until the page is assembled, the keys in this subsection, dealing with the width and style of an item, have variants
% that apply depending on where the item appears on the page.
%
%
% \medskip\goodbreak
%
%
% \DescribeOption{width recto right}
% \DescribeOption{width recto left}
% \DescribeOption{width verso right}
% \DescribeOption{width verso left}
% \DescribeOption{width right between}
% \DescribeOption{width left between}
% These keys specify the width of the an item of marginal content (or, more precisely, the \cs{hsize} of the box into
% which the item is typeset). Which width is chosen will depend on the where the item is typeset. The terminology is as
% in \fullref{Figure}{fig:terminology}.
% \begin{vallist}
%   \item[\key{width recto right}] used for an item in the right margin of a recto page.
%   \item[\key{width recto left}] used for an item in the left margin of a recto page.
%   \item[\key{width verso right}] used for an item in the right margin of a verso page.
%   \item[\key{width verso left}] used for an item in the left margin of a verso page.
%   \item[\key{width right between}] used for an item set from the right column and placed between the columns.
%   \item[\key{width left between}] used for an item set from the right column and placed between the columns.
% \end{vallist}
%
% \DescribeOption{width recto outer}
% \DescribeOption{width recto inner}
% \DescribeOption{width verso outer}
% \DescribeOption{width verso inner}
% These alternative keys similarly specify the width of an item of marginal content. The \key{inner} keys apply to the
% margin where the binding is (as specified by \key{binding side}) and the the \key{outer} keys apply to the opposite
% margin. Setting each of these keys has the same effect as setting the corresponding \key{right}/\key{left} key listed
% above. (See the documentation of \key{binding side} for further details of how \key{outer}/\key{inner} correspond to
% \key{right}/\key{left}.)
% \begin{vallist}
%   \item[\key{width recto outer}] used for an item in the outer margin of a recto page.
%   \item[\key{width recto inner}] used for an item in the inner margin of a recto page.
%   \item[\key{width verso outer}] used for an item in the outer margin of a verso page.
%   \item[\key{width verso inner}] used for an item in the inner margin of a verso page.
% \end{vallist}
%
% \DescribeOption{width}
% \DescribeOption{width between}
% \DescribeOption{width outer}
% \DescribeOption{width inner}
% These keys are shortcuts for setting more than one of the above keys simulateously.
% \begin{vallist}
%   \item[\key{width}] a shorthand for setting all of these keys simultaneously.
%   \item[\key{width between}] a shorthand for setting the keys \key{width right between} and \key{width left between}
%   simultaneously to the same value.
%   \item[\key{width outer}] a shorthand for setting the keys \key{width recto outer} and \key{width verso outer}
%   simultaneously to the same value.
%   \item[\key{width inner}] a shorthand for setting the keys \key{width recto inner} and \key{width verso inner}
%   simultaneously to the same value.
% \end{vallist}

% (The shorthands \key{width outer} and \key{width inner} exist because page geometry is usually symmetrical between
% recto and verso pages as regards outer and inner margins. The shorthand \key{width between} exists because the space
% between columns, if used at all for marginal content, will often be shared equally.) Each of these keys must be set to
% a valid dimension. \default{value of \cs{marginparwidth} at \cs{begin}\texttt{\{}\env{document}\texttt{\}}}
%
%
% \medskip\goodbreak
%
%
% \DescribeOption{style recto outer}
% \DescribeOption{style recto inner}
% \DescribeOption{style verso outer}
% \DescribeOption{style verso inner}
% \DescribeOption{style right between}
% \DescribeOption{style left between}
% These keys specify the style with which an item of marginal content is typeset. Which style is chosen will depend on
% where the item is typeset. The terminology is as in \fullref{Figure}{fig:terminology}.
% \begin{vallist}
%   \item[\key{style recto right}] used for an item in the outer margin of a recto page.
%   \item[\key{style recto left}] used for an item in the inner margin of a recto page.
%   \item[\key{style verso right}] used for an item in the outer margin of a verso page.
%   \item[\key{style verso left}] used for an item in the inner margin of a verso page.
%   \item[\key{style right between}] used for an item set from the right column between the columns.
%   \item[\key{style left between}] used for an item set from the right column between the columns.
% \end{vallist}
%
% \DescribeOption{style recto outer}
% \DescribeOption{style recto inner}
% \DescribeOption{style verso outer}
% \DescribeOption{style verso inner}
% These alternative keys similarly specify the style with which an item of marginal content is typeset. The \key{inner}
% keys apply to the margin where the binding is (as specified by \key{binding side}) and the the \key{outer} keys apply
% to the opposite margin. Setting each of these keys has the same effect as setting the corresponding
% \key{right}/\key{left} key listed above. (See the documentation of \key{binding side} for further details of how
% \key{outer}/\key{inner} correspond to \key{right}/\key{left}.)
% \begin{vallist}
%   \item[\key{style recto outer}] used for an item in the outer margin of a recto page.
%   \item[\key{style recto inner}] used for an item in the inner margin of a recto page.
%   \item[\key{style verso outer}] used for an item in the outer margin of a verso page.
%   \item[\key{style verso inner}] used for an item in the inner margin of a verso page.
% \end{vallist}
%
% \DescribeOption{style}
% There is one relevant shorthand:
% \begin{vallist}
%   \item[\key{style}] is a shorthand for setting all of these keys simultaneously.
% \end{vallist}
%
% Each of these keys should be set to \LaTeX\ code that specifies the style. \default{[Empty]}
%
%
%
% \medskip\goodbreak
%
%
% \DescribeOption{mark recto right}
% \DescribeOption{mark recto left}
% \DescribeOption{mark verso right}
% \DescribeOption{mark verso left}
% \DescribeOption{mark right between}
% \DescribeOption{mark left between}
% These keys specify code to typeset something alongside the line where the call to \cs{marginalia} appears, on the same
% side on which the marginal content is placed. Roughly speaking, they can be set to any \LaTeX\ code, from a single
% symbol to a \TikZ\ picture. Which code is chosen will depend on where the marginal item is typeset. If the marginal
% item is placed on the right of the text, the \key{mark} code will be executed in an \cs{rlap} flush with the right end
% of the line; if the marginal item is placed on the left of the text, the \key{mark} code will be executed in an
% \cs{llap} flush with the left end of the line. These could be used to place arrowheads or more complicated indicators
% associating a marginal item with the text; see \fullref{Figure}{fig:example-mark}
%
% The terminology for the various \key{mark} options is as in
% \fullref{Figure}{fig:terminology}.
% \begin{vallist}
%   \item[\key{mark recto right}] used for an item in the outer margin of a recto page.
%   \item[\key{mark recto left}] used for an item in the inner margin of a recto page.
%   \item[\key{mark verso right}] used for an item in the outer margin of a verso page.
%   \item[\key{mark verso left}] used for an item in the inner margin of a verso page.
%   \item[\key{mark right between}] used for an item set from the right column between the columns.
%   \item[\key{mark left between}] used for an item set from the right column between the columns.
% \end{vallist}
%
% \DescribeOption{mark recto outer}
% \DescribeOption{mark recto inner}
% \DescribeOption{mark verso outer}
% \DescribeOption{mark verso inner}
% These alternative keys similarly specify code to typeset something alongside the line where the call to
% \cs{marginalia} appears. The \key{inner} keys apply to the margin where the binding is (as specified by \key{binding
% side}) and the the \key{outer} keys apply to the opposite margin. Setting each of these keys has the same effect as
% setting the corresponding \key{right}/\key{left} key listed above. (See the documentation of \key{binding side} for
% further details of how \key{outer}/\key{inner} correspond to \key{right}/\key{left}.)
% \begin{vallist}
%   \item[\key{mark recto outer}] used for an item in the outer margin of a recto page.
%   \item[\key{mark recto inner}] used for an item in the inner margin of a recto page.
%   \item[\key{mark verso outer}] used for an item in the outer margin of a verso page.
%   \item[\key{mark verso inner}] used for an item in the inner margin of a verso page.
% \end{vallist}
%
% \DescribeOption{mark}
% There is one relevant shorthand:
% \begin{vallist}
%   \item[\key{mark}] is a shorthand for setting all of these keys simultaneously.
% \end{vallist}
%
% Each of these keys should be set to \LaTeX\ code. \default{[Empty]}
%
%
%
% \begin{figure}[p]
%   \lstinputlisting{marginalia-doc-example-mark.tex}
%   \begin{tikzpicture}
%     \pgfmathsetmacro{\s}{(\textwidth+.4pt)/210mm}
%     \pgfmathsetlengthmacro{\w}{\s*210mm}
%     \pgfmathsetlengthmacro{\h}{\s*95mm}
%     \path[save path=\outline] (0,0) -| ++(\w,-\h) -| cycle;
%     \begin{scope}
%       \clip[use path=\outline];
%       \node[anchor=north west,inner sep=0] at (0,0) {\includegraphics[scale=\s]{marginalia-doc-example-mark.pdf}};
%     \end{scope}
%     \draw[gray,use path=\outline];
%   \end{tikzpicture}
%   \caption{A demonstration of the \key{mark} option, in particular showing how it can be used to draw a \TikZ\ arrow
%   from a (moved) note to the relevant line. Notes: (1)~The code in the marginal content is processed \emph{before} the
%   mark, so the \key{mark} \TikZ\ code refers to a coordinate defined in the marginal content, not the other way
%   around. (2)~The code must be compiled \emph{three} times to give this output, because the \texttt{arrowstart}
%   coordinate is not placed correctly until after \pkg{marginalia} has placed the second marginal note on the second
%   run. Thus one more run is necessary for \TikZ\ to draw the arrow correctly.}
%   \label{fig:example-mark}
% \end{figure}
%
%
%
% \subsection{Warning message configuration}
%
% The options described in this subsection have no effect on the placement of marginal content, but simply affect the
% number of problems or changes that are listed at \cs{end}\texttt{\{\env{document}\}}. Note that each of them can be
% set to \val{0} to suppress the list entirely (although warnings will still be emitted).
%
% \DescribeOption{max problem count}
% \DescribeOption{max item data change count}
% \DescribeOption{max page data change count}
% These options specify the maximum number of placement problems, the maximum number of changes in marginal content item
% data, and the maximum number of changes in page data to list. \default{\val{40}, \val{10}, \val{10}, respectively.}
%
%
%
% \section{Placement}
% \label{sec:placement}
%
% The placement of an item of marginal content depends on where the call to \cs{marginalia} appears in the finished
% document. Both horizontal and vertical placement can be complicated.
%
%
%
% \subsection{Horizontal placement}
%
% To understand the horizontal placement, first recall some terminology: a recto page is an odd-numbered page in
% two-sided mode, or any page in one-sided mode; a verso page is an even-numbered page in two-sided mode. The
% description in the paragraphs that follow is summarized in \fullref{Figure}{fig:terminology}.
%
% \vspace{\baselineskip}
%
% In a document where the binding is on the left (and thus on the left of recto pages), which is specified with
% \keyvalue{binding side}{left}, the outer margin is on the right on recto pages and on the left on verso pages;
% the inner margin is on the left on recto pages and on the right on verso pages.
%
% In a document where the binding is on the right (and thus on the right of recto pages), which is specified with
% \keyvalue{binding side}{right}, the outer margin is on the left on recto pages and on the right on verso pages;
% the inner margin is on the right on recto pages and on the left on verso pages.
%
% \vspace{\baselineskip}
%
% \begin{figure}[p]
%   \centering
%   \begin{tikzpicture}[
%     x={.45*\textwidth},
%     y={sqrt(2)*.45*\textwidth},
%     ]
%
%     \begin{scope}
%
%       \node[
%       anchor=south,
%       node font=\ttfamily,
%       ] at (0,.5) {\keyvalue{binding side}{left}};
%
%       \begin{scope}[
%         every node/.style ={
%           node font=\small\sffamily\bfseries,
%           text=gray,
%           align=center,
%           anchor=north,
%         }
%         ]
%         \node at (-.5,.5) {VERSO PAGE};
%         \node at (.5,.5) {RECTO PAGE};
%       \end{scope}
%
%       \begin{pgfinterruptboundingbox}
%
%         \begin{scope}[
%           every node/.style ={
%             node font=\footnotesize\scshape,
%             align=center,
%           }
%           ]
%           \begin{scope}
%             \clip[decorate,decoration={snake,amplitude=1mm,segment length=5mm}] (-1,0) -- (1,0) -- (1,.5) -| cycle;
%             \begin{scope}[fill=lightgray]
%               \fill (-.7,-.35) rectangle (-.2,.35);
%               \node at (-.45,.175) {one\\column};
%               \fill (.7,-.35) rectangle (.2,.35);
%               \node at (.45,.175) {one\\column};
%             \end{scope}
%           \end{scope}
%
%           \begin{scope}
%             \clip[decorate,decoration={snake,amplitude=1mm,segment length=5mm}] (-1,0) -- (1,0) -- (1,-.5) -| cycle;
%             \begin{scope}[fill=lightgray]
%               \fill (-.85,-.35) rectangle (-.65,.35);
%               \node at (-.75,-.175) {left\\column};
%               \fill (-.35,-.35) rectangle (-.15,.35);
%               \node at (-.25,-.175) {right\\column};
%               \fill (.35,-.35) rectangle (.15,.35);
%               \node at (.25,-.175) {left\\column};
%               \fill (.85,-.35) rectangle (.65,.35);
%               \node at (.75,-.175) {right\\column};
%             \end{scope}
%           \end{scope}
%
%         \end{scope}
%
%       \end{pgfinterruptboundingbox}
%
%       \draw[white,line width=1pt,decorate,decoration={snake,amplitude=1mm,segment length=5mm}] (-1,0) -- (1,0);
%
%       \draw (0,-.5) -- (0,.5);
%       \draw (-1,-.5) rectangle (1,.5);
%
%       \begin{scope}[
%         every node/.style={
%           node font=\footnotesize\ttfamily,
%           inner xsep=3pt,
%         }
%           ]
%         ^^A Recto
%         \node[anchor=north west,align=left] at (.7,.35) {auto\\outer\\right};
%         \node[anchor=north east,align=right] at (.2,.35) {reverse\\inner\\left};
%
%         \node[anchor=south west,align=left] at (.85,-.35) {auto\\outer\\\smash{right}};
%         \node[anchor=north,shift={(-.03,0)},align=right] at (.65,-.35) {reverse\\inner\\left};
%         \node[anchor=north,shift={(.03,0)},align=left] at (.35,-.35) {reverse\\inner\\right};
%         \node[anchor=south east,align=right] at (.15,-.35) {auto\\inner\\left};
%
%         ^^A Verso
%         \node[anchor=north east,align=right] at (-.7,.35) {auto\\outer\\left};
%         \node[anchor=north west,align=left] at (-.2,.35) {reverse\\inner\\right};
%
%         \node[anchor=south east,align=right] at (-.85,-.35) {auto\\outer\\left};
%         \node[anchor=north,shift={(.03,0)},align=left] at (-.65,-.35) {reverse\\inner\\right};
%         \node[anchor=north,shift={(-.03,0)},align=right] at (-.35,-.35) {reverse\\outer\\left};
%         \node[anchor=south west,align=left] at (-.15,-.35) {auto\\inner\\\smash{right}};
%
%       \end{scope}
%
%       \begin{scope}[
%         every node/.style={
%           node font=\small\ttfamily,
%           inner xsep=6pt,
%         }
%         ]
%         \node[rotate=90,anchor=north] at (-1,0) {verso outer};
%         \node[rotate=90,anchor=north east,align=right] at (-.65,0) {left\\[-1pt]between};
%         \node[rotate=-90,anchor=north west,align=left] at (-.35,0) {right\\[-1pt]between};
%         \node[rotate=-90,anchor=north] at (0,0) {verso inner};
%         \node[rotate=90,anchor=north] at (0,0) {recto inner};
%         \node[rotate=90,anchor=north east,align=right] at (.35,0) {left\\[-1pt]between};
%         \node[rotate=-90,anchor=north west,align=left] at (.65,0) {right\\[-1pt]between};
%         \node[rotate=-90,anchor=north] at (1,0) {recto outer};
%       \end{scope}
%
%     \end{scope}
%
%     \begin{scope}[shift={(0,-1.1)}]
%
%         \node[
%         anchor=south,
%         node font=\ttfamily,
%         ] at (0,.5) {\keyvalue{binding side}{right}};
%
%       \begin{scope}[
%         every node/.style ={
%           node font=\small\sffamily\bfseries,
%           text=gray,
%           align=center,
%           anchor=north,
%         }
%         ]
%         \node at (-.5,.5) {RECTO PAGE};
%         \node at (.5,.5) {VERSO PAGE};
%       \end{scope}
%
%       \begin{pgfinterruptboundingbox}
%
%         \begin{scope}[
%           every node/.style ={
%             node font=\footnotesize\scshape,
%             align=center,
%           }
%           ]
%           \begin{scope}
%             \clip[decorate,decoration={snake,amplitude=1mm,segment length=5mm}] (-1,0) -- (1,0) -- (1,.5) -| cycle;
%             \begin{scope}[fill=lightgray]
%               \fill (-.7,-.35) rectangle (-.2,.35);
%               \node at (-.45,.175) {one\\column};
%               \fill (.7,-.35) rectangle (.2,.35);
%               \node at (.45,.175) {one\\column};
%             \end{scope}
%           \end{scope}
%
%           \begin{scope}
%             \clip[decorate,decoration={snake,amplitude=1mm,segment length=5mm}] (-1,0) -- (1,0) -- (1,-.5) -| cycle;
%             \begin{scope}[fill=lightgray]
%               \fill (-.85,-.35) rectangle (-.65,.35);
%               \node at (-.75,-.175) {left\\column};
%               \fill (-.35,-.35) rectangle (-.15,.35);
%               \node at (-.25,-.175) {right\\column};
%               \fill (.35,-.35) rectangle (.15,.35);
%               \node at (.25,-.175) {left\\column};
%               \fill (.85,-.35) rectangle (.65,.35);
%               \node at (.75,-.175) {right\\column};
%             \end{scope}
%           \end{scope}
%
%         \end{scope}
%
%       \end{pgfinterruptboundingbox}
%
%       \draw[white,line width=1pt,decorate,decoration={snake,amplitude=1mm,segment length=5mm}] (-1,0) -- (1,0);
%
%       \draw (0,-.5) -- (0,.5);
%       \draw (-1,-.5) rectangle (1,.5);
%
%       \begin{scope}[
%         every node/.style={
%           node font=\footnotesize\ttfamily,
%           inner xsep=3pt,
%         }
%           ]
%         ^^A Recto
%         \node[anchor=north west,align=left] at (.7,.35) {auto\\outer\\right};
%         \node[anchor=north east,align=right] at (.2,.35) {reverse\\inner\\left};
%
%         \node[anchor=south west,align=left] at (.85,-.35) {auto\\outer\\\smash{right}};
%         \node[anchor=north,shift={(-.03,0)},align=right] at (.65,-.35) {reverse\\inner\\left};
%         \node[anchor=north,shift={(.03,0)},align=left] at (.35,-.35) {reverse\\inner\\right};
%         \node[anchor=south east,align=right] at (.15,-.35) {auto\\inner\\left};
%
%         ^^A Verso
%         \node[anchor=north east,align=right] at (-.7,.35) {auto\\outer\\left};
%         \node[anchor=north west,align=left] at (-.2,.35) {reverse\\inner\\right};
%
%         \node[anchor=south east,align=right] at (-.85,-.35) {auto\\outer\\left};
%         \node[anchor=north,shift={(.03,0)},align=left] at (-.65,-.35) {reverse\\inner\\right};
%         \node[anchor=north,shift={(-.03,0)},align=right] at (-.35,-.35) {reverse\\outer\\left};
%         \node[anchor=south west,align=left] at (-.15,-.35) {auto\\inner\\\smash{right}};
%
%       \end{scope}
%
%       \begin{scope}[
%         every node/.style={
%           node font=\small\ttfamily,
%           inner xsep=6pt,
%         }
%         ]
%         \node[rotate=90,anchor=north] at (-1,0) {recto outer};
%         \node[rotate=90,anchor=north east,align=right] at (-.65,0) {left\\[-1pt]between};
%         \node[rotate=-90,anchor=north west,align=left] at (-.35,0) {right\\[-1pt]between};
%         \node[rotate=-90,anchor=north] at (0,0) {recto inner};
%         \node[rotate=90,anchor=north] at (0,0) {verso inner};
%         \node[rotate=90,anchor=north east,align=right] at (.35,0) {left\\[-1pt]between};
%         \node[rotate=-90,anchor=north west,align=left] at (.65,0) {right\\[-1pt]between};
%         \node[rotate=-90,anchor=north] at (1,0) {verso outer};
%       \end{scope}
%
%     \end{scope}
%
%   \end{tikzpicture}
%   \caption{Summary of the positioning of marginal content using \key{pos}, and terminology used in \key{width} and
%   \key{style} keys, on recto and verso pages, in both one-column and two-column mode. Above: when \keyvalue{binding
%   side}{left}. Below: when \keyvalue{binding side}{right}.}
%   \label{fig:terminology}
% \end{figure}
%
%
% In one-column mode, marginal content is placed by default in the outer margin. If \keyvalue{pos}{reverse} is applied,
% it is placed in the inner margin.
%
% In two-column mode, the default placement is next to the column in which the call to \cs{marginalia} appears, on the
% side opposite to the other column. Thus, if the call to \cs{marginalia} was in the left column, the marginal content
% item is placed by default on the left. If \keyvalue{pos}{reverse} is applied, it is placed between the two columns,
% adjacent to the left column. If the call to \cs{marginalia} was in the right column, the item is placed by default on
% the right. If \keyvalue{pos}{reverse} is applied, it is placed between the two columns, adjacent to the right column.
%
% \keyvalue{pos}{outer} specifies that the item is to be placed on the outer side of the text block or column containing
% the call to \cs{marginalia}. In two-column mode, if the column is adjacent to the inner margin, its outer side lies
% between the columns.
%
% \keyvalue{pos}{right} similarly specifies that the item is to be placed on the inner side of the text block or column
% containing the call to \cs{marginalia}. In two-column mode, if the column is adjacent to the outer margin, its inner
% side lies between the columns.
%
% \keyvalue{pos}{left} specifies that the item is to be placed on the left of the text block or column
% containing the call to \cs{marginalia}.
%
% \keyvalue{pos}{right} similarly specifies that the item is to be placed on the right of the text block or column
% containing the call to \cs{marginalia}.
%
% \pkg{marginalia} determines in which column the call to \cs{marginalia} was made using its horizontal position. As
% discussed in the description of the key \key{column}, there are situations where this can go wrong and which
% necessitate a manual specification of a particular column.
%
%
%
% \subsection{Vertical placement}
% \label{subsec:vertical-placement}
%
% \pkg{marginalia} tries by default to place the each item of marginal content with its baseline shifted by the value of
% \key{yshift} (by default, \qty{0}{\point}) from the baseline where \cs{marginalia} was called. The actual vertical
% placement is calculated by the procedure described below, carried out for the items appearing in a particular
% horizontal location. (As shown in \fullref{Figure}{fig:terminology}, in one-column mode the possible locations are in
% outer and inner margins; in two-column mode the possible locationd are the outer and inner margins and on the left and
% right sides of the space between the columns.) A \emph{clash} exists when two items are closer than specified by
% \key{ysep below} for the upper item or \key{ysep above} for the lower item, whichever is greater.
%
% For the items in each horizontal location, the procedure is as follows:
% \begin{enumerate}
%     \item Place the items appearing in a given horizontal location on the page into a list.
%     \item Set the vertical shift of each item to the one specified by \key{yshift}.
%     \item For each \keyvalue{type}{optfixed} item, if it clashes with any \keyvalue{type}{fixed} item, delete it from
%           the list of items that appear on the page.
%     \item Sort the list by the position of the call to \cs{marginalia}, top-to-bottom, left-to-right, breaking ties
%           by the order of calls. (Because of floats, footnotes, etc., the sorted order of the list is not necessarily
%           the same as the order of appearance of \cs{marginalia} commands in the source code.)
%     \item Pass through the list of items in sorted order. For each \keyvalue{type}{normal} item, if necessary shift it
%           in a negative (downward) direction so that it
%           \begin{enumerate*}[label={(\arabic*)}]
%             \item does not reach closer to the top of the page than specified by \texttt{ysep page top}, and
%             \item does not clash with the previous (above) item.
%           \end{enumerate*}
%           (After this stage, it is possible for an assigned vertical shift to push a \keyvalue{type}{normal} item off
%           the bottom of the page.)
%     \item Pass through the list of items in the reverse of the sorted order. For each \keyvalue{type}{normal} item, if
%           necessary shift it in a positive (upward) direction so that it
%           \begin{enumerate*}[label={(\arabic*)}]
%             \item does not reach closer to the bottom of the page than specified by \texttt{ysep page bottom}, and
%             \item does not clash with the next (below) item.
%           \end{enumerate*}
% \end{enumerate}
% During this process, it may be found that it is impossible to prevent clashes or items reaching beyond the limits
% (e.g. fixed items clash with each other; a fixed item conflicts with \texttt{ysep page top} or \texttt{ysep page
% bottom}, or there are simply too many items of marginal content to fit (in which case, the top of some of them will be
% above the limit specified by \texttt{ysep page top} or will clash with fixed items)). In these cases, warnings are
% issued at the end of the Lua\LaTeX\ run.
%
%
%
% \section{Usage notes}
% \label{sec:usage}
%
% \subsection{Multiple runs}
% \label{sec:multiple-runs}
%
% \pkg{marginalia} requires a minimum of two Lua\LaTeX\ runs, and often more, to place items of marginal content
% correctly. On the first pass, information about items, including their vertical size, is written to the \file{.aux}
% file, and this information is used to position them correctly on the next run. However, because \key{width} and
% \key{style} have variants dependent on the margin in which the item is placed, an item may only be typeset at the
% correct size on this second run. Thus the vertical size of the item may have changed and so the information written to
% the \file{.aux} file on the previous run may be out of date. In this case a third run may be needed for correct
% placement.
%
% More runs may be needed if the position of the call to \cs{marginalia} changes between runs. (For example, if
% \cs{marginalia} is used to set numbered sidenotes with per-page numbering, the number may change between runs and the
% small difference in widths can change line breaks and page/column breaks.) Provided that the main text stabilizes, the
% placement of items using \cs{marginalia} should be correct two runs later.
%
%
%
% \subsection{Reports of problems in placement}
%
% At the end of the Lua\LaTeX\ run, \pkg{marginalia} reports any problems encountered in the vertical placement of items
% (as decribed at the end of \fullref{Subsection}{subsec:vertical-placement}). These problems are based on calculations
% made on the basis of information from the previous written to the \file{.aux} file on the previous run, and may not
% arise if item positions or sizes (i.e. height or depth) have changed. \pkg{marginalia} also reports any changes in
% positions or sizes compared to the previous run.
%
% In these reports, a page number refers to a visible page number if it is prefixed with `\texttt{p}'; it otherwise
% refers to the absolute page number of the output.
%
%
%
% \subsection{Right-to-left text}
%
% \pkg{marginalia} should place items of marginal content correctly regardless of whether \cs{marginalia} is called from
% left-to-right text or right-to-left text. The text direction of the main text will be inherited by the marginal
% content. The \key{style} key is the natural place to alter this, if one wishes to have a different text direction in
% the marginal content.
%
% If the document as a whole is set in right-to-left text, then its binding is normally on the right. Using
% \keyvalue{binding side}{right} changes the meanings of keys involving \key{inner} and \key{outer} to reflect
% this binding position and also changes the meanings of \keyvalue{pos}{auto}, \val{reverse}, \val{outer}, \val{inner}
% appropriately.
%
% \medskip
%
% \noindent\emph{Note:} \pkg{marginalia} has not been tested extensively with right-to-left text and documents. Feedback
% (positive or negative) is welcome.
%
%
%
% \section{Incompatibilities}
%
% Using \pkg{marginalia} alongside \cs{marginpar} or packages like \pkg{mparhak}, \pkg{marginnote}, \pkg{marginfix}, or
% \pkg{marginfit} should not produce any errors, but \pkg{marginalia} will ignore marginal content not created using
% \cs{marginalia}; for example, an item of marginal content created using \cs{marginalia} might overlap with one created
% using \cs{marginpar}.
%
%
%
% \section{Limitations}
% \label{sec:limitations}
%
% As noted in the introduction, \pkg{marginalia} was originally written to typeset a particular kind of book. It thus
% has several limitations. Three of these are:
% \begin{description}
%     \item[Lua\LaTeX only] Most of the code for deciding the placement of items of marginal content is written in Lua.
%           In principle, it could be replaced with a pure \LaTeX\ solution.
%     \item[No support for `moving past' fixed items] The adjustment of vertical positions will never cause a
%           \keyvalue{type}{normal} item to be shifted past a \keyvalue{type}{fixed} one, even when there is space on
%           the other side. It may be desirable to have this available as an option.
%     \item[No support for nested content items] Nesting might be desirable for typesetting editions of manuscripts
%           which sometimes contain marginal glosses, and then glosses upon those glosses.
% \end{description}
%
% The lack of any built-in facility for producing (for example) numbered sidenotes is a conscious design choice. This is
% properly the concern of a command that merely uses \cs{marginalia} to place the notes correctly.
%
%
%
% ^^A\bibliography{\jobname}
% ^^A\bibliographystyle{alphaabbrv}
%
% \begin{thebibliography}{Cai24}
%
% \bibitem[Bri04]{bringhurst_elements}
% R.~Bringhurst.
% \newblock \emph{The Elements of Typographic Style}.
% \newblock Hartley {\&} Marks, version 3.0, 2004.
%
% \bibitem[Cai24]{cain_formandnumber_ebook_large}
% A.~J. Cain.
% \newblock \emph{Form \& Number: A History of Mathematical Beauty}.
% \newblock Lisbon, 2024.
% \newblock {\scshape url:}
%   \href{https://archive.org/details/cain_formandnumber_ebook_large}{\nolinkurl{https://archive.org/details/cain_formandnumber_ebook_large}}.
%
% \bibitem[Cai25]{c_marginalia}
% A.~J. Cain
% \newblock `\texttt{marginalia} at work: Running heads, float captions, citations, and small figures in the margins'.
% \newblock \textit{TUGboat}. The Communications of the \TeX\ Users Group. 46, no.1 (2025), pp.49--53.
% \newblock {\scshape doi:}
%   \href{https://dx.doi.org/10.47397/tb/46-1/tb142cain-marginalia}{\nolinkurl{10.47397/tb/46-1/tb142cain-marginalia}}
%
% \end{thebibliography}
%
%
%
% \end{documentation}
%
%
%
% \iffalse
%<*example-getting-started>
\documentclass[11pt,a4paper]{article}

\usepackage{marginalia}

\begin{document}

Here is some body text.\marginalia{Here is a marginal note.} Some more
body text.\marginalia[style=\footnotesize\itshape\raggedright]{Here is another
  marginal note, set in smaller text and italics, whose position has been been
  adjusted automatically.}

\vspace{20mm}

Some final body text after a space.\marginalia[pos=left, valign=b,
style=\sffamily\raggedleft, width=35mm]{This note is placed on the left side
  of the page, wider, in sans serif, ragged left, and bottom-aligned.}

\end{document}
%</example-getting-started>
%
%
%
%<*example-valign>
\documentclass[11pt,a4paper]{article}

\usepackage{marginalia}
\marginaliasetup{
  ysep page top=0mm,
  style recto outer=\raggedright\footnotesize,
  style recto inner=\raggedleft\footnotesize,
  width=30mm,
}

\begin{document}

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod%
\marginalia[valign=t]{{\large\ttfamily valign=t}\\The baseline of this marginal note
  is the baseline of the its top line.}%
\marginalia[valign=b,pos=reverse]{{\large\ttfamily valign=b}\\The  baseline of this
  marginal note is the baseline of its bottom line.}

\vspace{30mm}

Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris
nisi%
\marginalia[valign=c,pos=reverse]{{\large\ttfamily valign=c}\\The baseline of this
  marginal note is midway between the top and bottom of its content.}%
\marginalia[valign=m]{{\large\ttfamily valign=m}\\The baseline of this marginal note
  is midway between the baseline of its top line and the baseline of its bottom line.}

\end{document}
%</example-valign>
%
%
%
%<*example-mark>
\documentclass[11pt,a4paper]{article}

\usepackage{marginalia}
\marginaliasetup{
  xsep=5mm, style=\raggedright\sffamily,
}

\usepackage{tikz}
\newcommand\drawarrow{%
  \tikz[remember picture,overlay]
    \draw[->,thick] (arrowstart) -- ++(-1.5mm,0) |- (.5mm,.5ex);%
}
\newcommand\savearrowstart{%
  \tikz[remember picture,overlay] \coordinate (arrowstart) at (-.5mm,.5ex);%
}

\begin{document}

Lorem ipsum dolor sit amet,%
\marginalia[mark={~$\triangleleft$}]{A marginal  note. (Extra text to push down the
  note below.)} consectetur adipiscing elit, sed do eiusmod tempor incididunt ut
labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation
ullamco laboris nisi ut aliquip ex ea commodo consequat.%
\marginalia[mark={\drawarrow}]{\savearrowstart Another  marginal note.}
Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu
fugiat nulla pariatur.

\end{document}
%</example-mark>
% \fi
%
%
%
% \clearpage
% \begin{implementation}
%
%
%
% \section{Implementation (\LaTeX\ package)}
%
%    \begin{macrocode}
%<*package>
%<@@=marginalia>
%    \end{macrocode}
%
%
%
% \subsection{Initial set-up}
%
% Package identification/version information.
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}[2020-02-02]
\ProvidesExplPackage{marginalia}{2026-08-12}{0.84.3}
  {Non-floating marginal content for LuaLaTeX}
%    \end{macrocode}
% Check that Lua\TeX\ is in use.
%    \begin{macrocode}
\sys_if_engine_luatex:F
  {
    \msg_new:nnn{marginalia}{lualatex_required}
      {LuaLaTeX~required.~Package~loading~will~abort.}
    \msg_critical:nn{marginalia}{lualatex_required}
  }
%    \end{macrocode}
%
%
%
% \subsection{Tagging set-up}
%
% If \LaTeX\ has tagging support, set up sockets if necessary and define \cs{@@_tagging_socket:n} to be
% \cs{UseTaggingSocket}.
%    \begin{macrocode}
\@ifundefined{UseTaggingSocket}
  {
    \cs_new:Npn \@@_tagging_socket:n #1 {}
  }
  {
    \str_if_exist:cF { l__socket_tagsupport/marginpar/begin_plug_str }
       {
         \socket_new:nn {tagsupport/marginpar/begin}{0}
         \socket_new:nn {tagsupport/marginpar/end}{0}
       }
    \str_if_exist:cF { l__socket_tagsupport/para/restore_plug_str }
       {
         \socket_new:nn {tagsupport/para/restore}{0}
       }
    \cs_new:Npn \@@_tagging_socket:n #1
       {
         \UseTaggingSocket{#1}
       }
  }
%    \end{macrocode}
%
%
%
% \subsection{Lua backend and interface}
%
% Load the Lua backend.
%    \begin{macrocode}
\lua_now:n{ require('marginalia') }
%    \end{macrocode}
%
% The following 10 macros interface between \LaTeX\ and Lua code. Each control sequence \cs[no-index]{@@_lua_XYZ}
% simply calls the corresponding Lua function \luafunc{marginalia.XYZ}.
% \begin{macro}{
% \@@_lua_store_default_page_data:,
% \@@_lua_store_page_data:n,
% \@@_lua_check_page_data:n,
% \@@_lua_store_item_data:n,
% \@@_lua_check_item_data:n,
% \@@_lua_compute_items:,
% \@@_lua_write_problem_report:,
% \@@_lua_write_item_change_report:,
% }
%   The first 8 macros do not require expansion of parameters: they either have none, or process data not containing
%   control sequences (read from the \file{.aux} file); hence \cs{lua_now:n} is used.
%    \begin{macrocode}
\cs_new:Npn\@@_lua_store_default_page_data:
  {
    \lua_now:n{ marginalia.store_default_page_data() }
  }
\cs_new:Npn\@@_lua_store_page_data:n #1
  {
    \lua_now:n{ marginalia.store_page_data('#1') }
  }
\cs_new:Npn\@@_lua_check_page_data:n #1
  {
    \lua_now:n{ marginalia.check_page_data('#1') }
  }
\cs_new:Npn\@@_lua_write_page_change_report:
  {
    \lua_now:n{ marginalia.write_page_change_report() }
  }
\cs_new:Npn\@@_lua_store_item_data:n #1
  {
    \lua_now:n{ marginalia.store_item_data('#1') }
  }
\cs_new:Npn\@@_lua_check_item_data:n #1
  {
    \lua_now:n{ marginalia.check_item_data('#1') }
  }
\cs_new:Npn\@@_lua_compute_items:
  {
    \lua_now:n{ marginalia.compute_items() }
  }
\cs_new:Npn\@@_lua_write_problem_report:
  {
    \lua_now:n{ marginalia.write_problem_report() }
  }
\cs_new:Npn\@@_lua_write_item_change_report:
  {
    \lua_now:n{ marginalia.write_item_change_report() }
  }
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
%   \@@_lua_load_item_data:n,
% }
%   This macro will receive a control sequence parameter and so requires expansion; hence
%   \cs{lua_now:e} is used.
%    \begin{macrocode}
\cs_new:Npn\@@_lua_load_item_data:n #1
  {
    \lua_now:e{ marginalia.load_item_data('#1') }
  }
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
%   \@@_lua_call_boolean:nN,
% }
%   Call the Lua function (in the \luavar{marginalia} module) named by the first parameter to the value of the
%   \pkg{expl3}boolean given in the second parameter. Since the boolean must be converted to a string, \cs{lua_now:e} is
%   used.
%    \begin{macrocode}
\cs_new:Npn \@@_lua_call_boolean:nN #1#2
  {
    \lua_now:e{ marginalia.#1(\bool_to_str:N #2) }
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Auxiliary macros for setting options}
%
% \subsubsection{General}
%
% \begin{macro}{\@@_setup_preamble:n}
%   Macro used to set the configuration in the preamble. This only has effect at the outer group level: inside a group,
%   options should be confined to that group, so adding the options that use the \texttt{begindocument} hook should have
%   no effect. And since the \cs{marginalia} command cannot be used in the preamble, setting other options inside a
%   group in the preamble is pointless.
%    \begin{macrocode}
\cs_new:Npn \@@_setup_preamble:n #1
  {
    \int_if_zero:nT{ \currentgrouplevel }
      {
        \keys_set:nn{marginalia}{ #1 }
      }
  }
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@@_setup_body:n}
%   Macro used to set the configuration in the document body.
%    \begin{macrocode}
\cs_new:Npn \@@_setup_body:n #1
  {
    \keys_set:nn{marginalia}{ #1 }
  }
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@@_setup:n}
%   The macro \cs{@@_setup:n} is defined to be \cs{@@_setup_preamble:n} initially and is redefined to
%   \cs{@@_setup_body:n} at \texttt{begindocument/end}.
%    \begin{macrocode}
\cs_set_eq:NN\@@_setup:n\@@_setup_preamble:n
\hook_gput_code:nnn{ begindocument/end }{ marginalia/setup }
  {
    \cs_set_eq:NN\@@_setup:n\@@_setup_body:n
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{\key{outer}/\key{inner} options}
%
% \begin{macro}{
%   \@@_outer_inner_set_immediate:NNNn
% }
%   Use immediately the setting command supplied in the first parameter to set the variables supplied as the second
%   parameter (if \cs{l_@@_binding_left_bool} is true) or the third parameter (if \cs{l_@@_binding_left_bool} is false)
%   to the value supplied as the fourth parameter.
%    \begin{macrocode}
\cs_set:Npn \@@_outer_inner_set_immediate:NNNn #1#2#3#4
  {
    \bool_if:NTF\l_@@_binding_left_bool
      { #1#2{#4} }
      { #1#3{#4} }
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \begin{macro}{
%   \@@_outer_inner_set_deferred:NNNn
% }
%   At the \texttt{begindocument} hook, use the setting command supplied in the first parameter to set
%   the variables supplied as the second parameter (if \cs{l_@@_binding_left_bool} is true) or the third parameter (if
%   \cs{l_@@_binding_left_bool} is false) to the value supplied as the fourth parameter.
%    \begin{macrocode}
\cs_set:Npn \@@_outer_inner_set_deferred:NNNn #1#2#3#4
  {
    \hook_gput_code:nnn { begindocument } { marginalia/outer-inner-set }
      {
        \@@_outer_inner_set_immediate:NNNn #1#2#3{#4}
      }
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \begin{macro}{
%   \@@_outer_inner_set:NNNn
% }
%   Initially, \cs{@@_outer_inner_set:Nn} is \cs{@@_outer_inner_set_deferred:Nn}, but is redefined at
%   \texttt{begindocument/end} to be \cs{@@_outer_inner_set_immediate:Nn}.
%    \begin{macrocode}
\cs_set_eq:NN
  \@@_outer_inner_set:NNNn
  \@@_outer_inner_set_deferred:NNNn
\hook_gput_code:nnn { begindocument/end } { marginalia/outer-inner-set-redefinition }
  {
    \cs_set_eq:NN
      \@@_outer_inner_set:NNNn
      \@@_outer_inner_set_immediate:NNNn
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Dimension options}
%
% \begin{macro}{
%   \@@_dim_set_deferred:Nn,
% }
%   Set the dimension variable passed as the first parameter to value specified in second parameter at
%   \cs{begin}\texttt{\{}\env{document}\texttt{\}}.
%    \begin{macrocode}
\cs_new:Nn \@@_dim_set_deferred:Nn
  {
    \hook_gput_code:nnn { begindocument } { marginalia/dim }
      {
        \dim_set:Nn #1 { #2 }
      }
  }
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
%   \@@_dim_set:Nn,
% }
%   Initially, \cs{@@_dim_set:Nn} is \cs{@@_dim_set_deferred:Nn}, but is redefined at \texttt{begindocument/end} to
%   be \cs{dim_set:Nn}.
%    \begin{macrocode}
\cs_set_eq:NN \@@_dim_set:Nn \@@_dim_set_deferred:Nn
\hook_gput_code:nnn { begindocument/end } { marginalia/dim-set-redefinition }
  {
    \cs_set_eq:NN \@@_dim_set:Nn \dim_set:Nn
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Options}
%
% Set up the key--value options and the variables in which the settings will be stored.
%
%
%
% \subsubsection{Document orientation}
%
% \begin{macro}{
%   \l_@@_binding_left_bool,
% }
%    \begin{macrocode}
\bool_new:N\l_@@_binding_left_bool
\keys_define:nn { marginalia }
{
  binding~side .choices:nn = { right,left }{
    \int_compare:nNnTF{\l_keys_choice_int}={2}
      { \bool_set_true:N \l_@@_binding_left_bool }
      { \bool_set_false:N\l_@@_binding_left_bool }
  },
  binding~side .usage:n = preamble,
  binding~side .initial:n = left,
}
%    \end{macrocode}
% \end{macro}
%
% The value of \cs{l_@@_binding_left_bool} must be passed to the Lua backend at
% \cs{begin}\texttt{\{}\env{document}\texttt{\}}, since the resolution of \keyvalue{pos}{auto}, \val{reverse},
% \val{outer}, \val{inner} takes place there.
%    \begin{macrocode}
\hook_gput_code:nnn{ begindocument }{ marginalia/options }{
  \@@_lua_call_boolean:nN
    {set_binding_left}\l_@@_binding_left_bool
}
%    \end{macrocode}
%
%
%
% \subsubsection{Type}
%
% \begin{macro}{
%   \l_@@_type_int,
% }
%   A key to store the type of the marginal content item. The setting is held in an integer variable:
%   \(1 = \key{normal}\), \(2 = \key{fixed}\), \(3 = \key{optfixed}\).
%    \begin{macrocode}
\int_new:N\l_@@_type_int
\keys_define:nn { marginalia }
{
  type .choices:nn = {normal,fixed,optfixed}{
    \int_set:Nn\l_@@_type_int{\l_keys_choice_int}
  },
  type .initial:n = normal,
}
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Horizontal placement}
%
% \begin{macro}{
%   \l_@@_pos_int,
% }
%   A key to store the specified position of the marginal content item. The setting is held in an integer variable:
%   \(1 = \key{auto}\), (the outer margin in one-column mode; left margin in left column, right margin in right column
%   in two-column mode) \(2 = \key{reverse}\) (inner margin in one-column mode; between the columns in two-column mode),
%   \(3 = \key{outer}\), \(4 = \key{inner}\), \(5 = \key{right}\), \(6 = \key{left}\), \(7 = \key{nearest}\).
%    \begin{macrocode}
\int_new:N\l_@@_pos_int
\keys_define:nn { marginalia }
{
  pos .choices:nn = {auto,reverse,outer,inner,right,left,nearest}{
    \int_set:Nn\l_@@_pos_int{\l_keys_choice_int}
  },
  pos .initial:n = auto
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
%   \l_@@_column_int,
% }
%   A key to force the marginal content item to be treated in one-column mode or as being set from the left or right
%   column. The setting is held in an integer variable: \(-1 = \key{auto}\) (automatic), \(0 = \key{one}\) (one-column
%   mode), \(1 = \key{left}\) (left column) \(2 = \key{right}\) (right column).
%    \begin{macrocode}
\int_new:N\l_@@_column_int
\keys_define:nn { marginalia }
{
  column .choices:nn = {auto,one,left,right}{
    \int_set:Nn\l_@@_column_int{\l_keys_choice_int-2}
  },
  column .initial:n = auto,
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
%   \l_@@_xsep_recto_right_dim,
%   \l_@@_xsep_recto_left_dim,
%   \l_@@_xsep_verso_left_dim,
%   \l_@@_xsep_verso_right_dim,
%   \l_@@_xsep_right_between_dim,
%   \l_@@_xsep_left_between_dim,
% }
%   Dimension keys to hold the separation between the marginal content item and the main text, which can be dependent on
%   where it appears on the page.
%    \begin{macrocode}
\dim_new:N\l_@@_xsep_recto_right_dim
\dim_new:N\l_@@_xsep_recto_left_dim
\dim_new:N\l_@@_xsep_verso_left_dim
\dim_new:N\l_@@_xsep_verso_right_dim
\dim_new:N\l_@@_xsep_right_between_dim
\dim_new:N\l_@@_xsep_left_between_dim
\keys_define:nn { marginalia }
{
  xsep~recto~right .code:n
    = \@@_dim_set:Nn\l_@@_xsep_recto_right_dim{#1},
  xsep~recto~left .code:n
    = \@@_dim_set:Nn\l_@@_xsep_recto_left_dim{#1},
  xsep~verso~right .code:n
    = \@@_dim_set:Nn\l_@@_xsep_verso_right_dim{#1},
  xsep~verso~left .code:n
    = \@@_dim_set:Nn\l_@@_xsep_verso_left_dim{#1},
  xsep~right~between .code:n
    = \@@_dim_set:Nn\l_@@_xsep_right_between_dim{#1},
  xsep~left~between .code:n
    = \@@_dim_set:Nn\l_@@_xsep_left_between_dim{#1},
  xsep .meta:n = {
    xsep~recto~right=#1,
    xsep~recto~left=#1,
    xsep~verso~right=#1,
    xsep~verso~left=#1,
    xsep~right~between=#1,
    xsep~left~between=#1,
  },
  xsep .initial:n = \marginparsep,
}
%    \end{macrocode}
% Set up \key{outer}/\key{inner} keys, which will set the appropriate \key{left}/\key{right} keys.
%    \begin{macrocode}
\keys_define:nn { marginalia }
{
  xsep~recto~outer .code:n = {
    \@@_outer_inner_set:NNNn
      \dim_set:Nn
      \l_@@_xsep_recto_right_dim
      \l_@@_xsep_recto_left_dim
      {#1}
  },
  xsep~recto~inner .code:n = {
    \@@_outer_inner_set:NNNn
      \dim_set:Nn
      \l_@@_xsep_recto_left_dim
      \l_@@_xsep_recto_right_dim
      {#1}
  },
  xsep~verso~outer .code:n = {
    \@@_outer_inner_set:NNNn
      \dim_set:Nn
      \l_@@_xsep_verso_left_dim
      \l_@@_xsep_verso_right_dim
      {#1}
  },
  xsep~verso~inner .code:n = {
    \@@_outer_inner_set:NNNn
      \dim_set:Nn
      \l_@@_xsep_verso_right_dim
      \l_@@_xsep_verso_left_dim
      {#1}
  },
  xsep~outer .meta:n = {
    xsep~recto~outer=#1,
    xsep~verso~outer=#1,
  },
  xsep~inner .meta:n = {
    xsep~recto~inner=#1,
    xsep~verso~inner=#1,
  },
}
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Vertical placement}
%
% \begin{macro}{
%   \l_@@_valign_int,
% }
%   A key to store the vertical alignment of the marginal content item. The setting is held in a integer variable:
%   \(1 = \key{t}\) (aligned at the baseline of the topmost line of the item), \(2 = \key{b}\) (aligned at the baseline
%   of the bottommost line of the item).
%    \begin{macrocode}
\int_new:N\l_@@_valign_int
\keys_define:nn { marginalia }
{
  valign .choices:nn = {t,b,c,m}{
    \int_set_eq:NN\l_@@_valign_int\l_keys_choice_int
  },
  valign .initial:n = t,
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
%   \l_@@_default_yshift_dim,
% }
%   Dimension key to hold the default vertical shift of the marginal content item from its natural position.
%    \begin{macrocode}
\keys_define:nn { marginalia }
{
  yshift .dim_set:N = \l_@@_default_yshift_dim,
  yshift .initial:n = 0pt,
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
%   \@@_margin_top:,
%   \@@_margin_bottom:
% }
%   These macros are simply the calculations necessary for the space above and below the main textblock. They are simply
%   a convenience to avoid specifying the calcuation twice in the definition of the \key{ysep} keys.
%    \begin{macrocode}
\cs_new:Npn \@@_margin_top:
  {
    1in + \voffset + \topmargin + \headheight + \headsep
  }
\cs_new:Npn \@@_margin_bottom:
  {
    \pageheight - 1in - \voffset - \topmargin - \headheight - \headsep
      - \textheight
  }
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
%   \l_@@_ysep_above_dim,
%   \l_@@_ysep_below_dim,
%   \l_@@_ysep_page_top_dim,
%   \l_@@_ysep_page_bottom_dim,
% }
%   Dimension keys to hold the the minimum vertical spacing between a marginal content item and (respectively) the item
%   above, the item below, the page top, and the page bottom.
%    \begin{macrocode}
\dim_new:N\l_@@_ysep_above_dim
\dim_new:N\l_@@_ysep_below_dim
\dim_new:N\l_@@_ysep_page_top_dim
\dim_new:N\l_@@_ysep_page_bottom_dim
\keys_define:nn { marginalia }
{
  ysep~above .code:n
    = \@@_dim_set:Nn\l_@@_ysep_above_dim{#1},
  ysep~below .code:n
    = \@@_dim_set:Nn\l_@@_ysep_below_dim{#1},
  ysep~page~top .code:n
    = \@@_dim_set:Nn\l_@@_ysep_page_top_dim{#1},
  ysep~page~bottom .code:n
    = \@@_dim_set:Nn\l_@@_ysep_page_bottom_dim{#1},
  ysep~page~top~margin .meta:n = {
    ysep~page~top
      = \@@_margin_top:
  },
  ysep~page~bottom~margin .meta:n = {
    ysep~page~bottom
      = \@@_margin_bottom:
  },
  ysep~page~top~bottom~margin .meta:n = {
    ysep~page~top~margin,
    ysep~page~bottom~margin,
  },
  ysep~above~below .meta:n = {
    ysep~below=#1,
    ysep~above=#1,
  },
  ysep .meta:n = {
    ysep~below=#1,
    ysep~above=#1,
    ysep~page~top=#1,
    ysep~page~bottom=#1,
  },
  ysep~above~below .initial:n = \marginparpush,
  ysep~page~top .initial:n = \@@_margin_top:,
  ysep~page~bottom .initial:n = \@@_margin_bottom:,
}
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Appearance}
%
% \begin{macro}{
%   \l_@@_width_recto_right_dim,
%   \l_@@_width_recto_left_dim,
%   \l_@@_width_verso_left_dim,
%   \l_@@_width_verso_right_dim,
%   \l_@@_width_right_between_dim,
%   \l_@@_width_left_between_dim,
% }
%   Dimension keys to hold the width of the marginal content item, which can be dependent on where it appears on the
%   page.
%    \begin{macrocode}
\dim_new:N\l_@@_width_recto_right_dim
\dim_new:N\l_@@_width_recto_left_dim
\dim_new:N\l_@@_width_verso_left_dim
\dim_new:N\l_@@_width_verso_right_dim
\dim_new:N\l_@@_width_right_between_dim
\dim_new:N\l_@@_width_left_between_dim
\keys_define:nn { marginalia }
{
  width~recto~right   .code:n
    = \@@_dim_set:Nn\l_@@_width_recto_right_dim{#1},
  width~recto~left   .code:n
    = \@@_dim_set:Nn\l_@@_width_recto_left_dim{#1},
  width~verso~right   .code:n
    = \@@_dim_set:Nn\l_@@_width_verso_right_dim{#1},
  width~verso~left   .code:n
    = \@@_dim_set:Nn\l_@@_width_verso_left_dim{#1},
  width~right~between .code:n
    = \@@_dim_set:Nn\l_@@_width_right_between_dim{#1},
  width~left~between  .code:n
    = \@@_dim_set:Nn\l_@@_width_left_between_dim{#1},
  width .meta:n = {
    width~recto~right=#1,
    width~recto~left=#1,
    width~verso~right=#1,
    width~verso~left=#1,
    width~right~between=#1,
    width~left~between=#1,
  },
  width~between .meta:n = {
    width~right~between=#1,
    width~left~between=#1,
  },
  width .initial:n = \marginparwidth,
}
%    \end{macrocode}
% Set up \key{outer}/\key{inner} keys, which will set the appropriate \key{left}/\key{right} keys.
%    \begin{macrocode}
\keys_define:nn { marginalia }
{
  width~recto~outer .code:n = {
    \@@_outer_inner_set:NNNn
      \dim_set:Nn
      \l_@@_width_recto_right_dim
      \l_@@_width_recto_left_dim
      {#1}
  },
  width~recto~inner .code:n = {
    \@@_outer_inner_set:NNNn
      \dim_set:Nn
      \l_@@_width_recto_left_dim
      \l_@@_width_recto_right_dim
      {#1}
  },
  width~verso~outer .code:n = {
    \@@_outer_inner_set:NNNn
      \dim_set:Nn
      \l_@@_width_verso_left_dim
      \l_@@_width_verso_right_dim
      {#1}
  },
  width~verso~inner .code:n = {
    \@@_outer_inner_set:NNNn
      \dim_set:Nn
      \l_@@_width_verso_right_dim
      \l_@@_width_verso_left_dim
      {#1}
  },
  width~outer .meta:n = {
    width~recto~outer=#1,
    width~verso~outer=#1,
  },
  width~inner .meta:n = {
    width~recto~inner=#1,
    width~verso~inner=#1,
  },
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
%   \l_@@_style_recto_right_tl,
%   \l_@@_style_recto_left_tl,
%   \l_@@_style_verso_left_tl,
%   \l_@@_style_verso_right_tl,
%   \l_@@_style_right_between_tl,
%   \l_@@_style_left_between_tl,
% }
%   Token list keys to hold the style with which a marginal content item is typeset, which can be dependent on where it
%   appears on the page.
%    \begin{macrocode}
\keys_define:nn { marginalia }
{
  style~recto~right .tl_set:N = \l_@@_style_recto_right_tl,
  style~recto~left .tl_set:N = \l_@@_style_recto_left_tl,
  style~verso~right .tl_set:N = \l_@@_style_verso_right_tl,
  style~verso~left .tl_set:N = \l_@@_style_verso_left_tl,
  style~right~between .tl_set:N = \l_@@_style_right_between_tl,
  style~left~between .tl_set:N = \l_@@_style_left_between_tl,
  style .meta:n = {
    style~recto~right=#1,
    style~recto~left=#1,
    style~verso~right=#1,
    style~verso~left=#1,
    style~right~between=#1,
    style~left~between=#1,
  },
  style .initial:n = {},
}
%    \end{macrocode}
% Set up \key{outer}/\key{inner} keys, which will set the appropriate \key{left}/\key{right} keys.
%    \begin{macrocode}
\keys_define:nn { marginalia }
{
  style~recto~outer .code:n = {
    \@@_outer_inner_set:NNNn
      \tl_set:Nn
      \l_@@_style_recto_right_tl
      \l_@@_style_recto_left_tl
      {#1}
  },
  style~recto~inner .code:n = {
    \@@_outer_inner_set:NNNn
      \tl_set:Nn
      \l_@@_style_recto_left_tl
      \l_@@_style_recto_right_tl
      {#1}
  },
  style~verso~outer .code:n = {
    \@@_outer_inner_set:NNNn
      \tl_set:Nn
      \l_@@_style_verso_left_tl
      \l_@@_style_verso_right_tl
      {#1}
  },
  style~verso~inner .code:n = {
    \@@_outer_inner_set:NNNn
      \tl_set:Nn
      \l_@@_style_verso_right_tl
      \l_@@_style_verso_left_tl
      {#1}
  },
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
%   \l_@@_mark_recto_right_tl,
%   \l_@@_mark_recto_left_tl,
%   \l_@@_mark_verso_left_tl,
%   \l_@@_mark_verso_right_tl,
%   \l_@@_mark_right_between_tl,
%   \l_@@_mark_left_between_tl,
% }
%   Token list keys to hold code for a mark to be placed adjacent to the line where the call to\cs{marginalia} is
%   located, on the same side as the marginal content item.
%    \begin{macrocode}
\keys_define:nn { marginalia }
{
  mark~recto~right .tl_set:N = \l_@@_mark_recto_right_tl,
  mark~recto~left  .tl_set:N = \l_@@_mark_recto_left_tl,
  mark~verso~right .tl_set:N = \l_@@_mark_verso_right_tl,
  mark~verso~left .tl_set:N = \l_@@_mark_verso_left_tl,
  mark~right~between .tl_set:N = \l_@@_mark_right_between_tl,
  mark~left~between .tl_set:N = \l_@@_mark_left_between_tl,
  mark .meta:n = {
    mark~recto~right=#1,
    mark~recto~left=#1,
    mark~verso~right=#1,
    mark~verso~left=#1,
    mark~right~between=#1,
    mark~left~between=#1,
  },
  mark .initial:n = {},
}
%    \end{macrocode}
% Set up \key{outer}/\key{inner} keys, which will set the appropriate \key{left}/\key{right} keys.
%    \begin{macrocode}
\keys_define:nn { marginalia }
{
  mark~recto~outer .code:n = {
    \@@_outer_inner_set:NNNn
      \tl_set:Nn
      \l_@@_mark_recto_right_tl
      \l_@@_mark_recto_left_tl
      {#1}
  },
  mark~recto~inner .code:n = {
    \@@_outer_inner_set:NNNn
      \tl_set:Nn
      \l_@@_mark_recto_left_tl
      \l_@@_mark_recto_right_tl
      {#1}
  },
  mark~verso~outer .code:n = {
    \@@_outer_inner_set:NNNn
      \tl_set:Nn
      \l_@@_mark_verso_left_tl
      \l_@@_mark_verso_right_tl
      {#1}
  },
  mark~verso~inner .code:n = {
    \@@_outer_inner_set:NNNn
      \tl_set:Nn
      \l_@@_mark_verso_right_tl
      \l_@@_mark_verso_left_tl
      {#1}
  },
}
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Warning message configuration}
%
% \begin{macro}{
%   \l_@@_max_problem_int,
%   \l_@@_max_page_data_change_int,
%   \l_@@_max_item_data_change_int,
% }
%   Integer keys to control the number of changes to be output
%    \begin{macrocode}
\keys_define:nn { marginalia }
{
  max~problem~count .int_set:N = \l_@@_max_problem_int,
  max~problem~count .initial:n= 40,
  max~page~data~change~count .int_set:N = \l_@@_max_page_data_change_int,
  max~page~data~change~count .initial:n = 10,
  max~item~data~change~count .int_set:N = \l_@@_max_item_data_change_int,
  max~item~data~change~count .initial:n = 10,
}
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Processing data from the \texorpdfstring{\file{.aux}}{.aux} file}
%
% \begin{macro}[int]{
%   \marginalia@pagedata,
% }
%   This command is used to store version information in the \file{.aux} file. It currently does nothing, but may be
%   used in future to avoid errors if changes are made in the format of the data written to the \file{.aux} file.
%    \begin{macrocode}
\cs_new:Npn \marginalia@version #1
  {}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{
%   \marginalia@pagedata,
% }
%   This command is used to store page data in the \file{.aux} file.
%    \begin{macrocode}
\cs_new:Npn \marginalia@pagedata #1
  {
    \@@_process_page_data:n{#1}
  }
%    \end{macrocode}
%   Initially \cs{@@_process_page_data:n} is set to \cs{@@_lua_store_page_data:n}. Thus, when the \file{.aux} file is
%   read, \cs{marginalia@pagedata} will pass the page data to the Lua backend to be stored.
%    \begin{macrocode}
\cs_set_eq:NN
  \@@_process_page_data:n
  \@@_lua_store_page_data:n
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{
%   \marginalia@itemdata,
% }
%   This command is used to store data for each marginal content item in the \file{.aux} file.
%    \begin{macrocode}
\cs_new:Npn \marginalia@itemdata #1
  {
    \@@_process_item_data:n{#1}
  }
%    \end{macrocode}
% \end{macro}
% Initially \cs{@@_process_item_data:n} is set to \cs{@@_lua_store_item_data:n}. Thus, when the \file{.aux} file is
% read, \cs{marginalia@itemdata} will pass the item data to the Lua backend to be stored.
%    \begin{macrocode}
\cs_set_eq:NN
  \@@_process_item_data:n
  \@@_lua_store_item_data:n
%    \end{macrocode}
% At the \texttt{begindocument} hook, the \file{.aux} file has been read and closed. The Lua backend now stores the
% geometry and computes the vertical shift for each item. Then the handle for the main \file{.aux} file is stored for
% use in this package.
%    \begin{macrocode}
\hook_gput_code:nnn{ begindocument }{ marginalia/prepare }{
  \@@_lua_store_default_page_data:
  \@@_lua_compute_items:
  \cs_set_eq:NN\l_@@_aux_iow\@mainaux
}
%    \end{macrocode}
% The \texttt{enddocument/afterlastpage} hook is before the \file{.aux} file is read back, so this is where
% \cs{@@_process_page_data:n} and \cs{@@_process_item_data:n} are set, respectively, to \cs{@@_lua_check_page_data:n}
% and \cs{@@_lua_check_item_data:n}. Thus, when the \file{.aux} file is read back, \cs{marginalia@pagedata} and
% \cs{marginalia@itemdata} will pass data to the Lua backend to be checked for changes.
%    \begin{macrocode}
\hook_gput_code:nnn{enddocument/afterlastpage}{ marginalia/check }{
  \cs_set_eq:NN
    \@@_process_page_data:n
    \@@_lua_check_page_data:n
  \cs_set_eq:NN
    \@@_process_item_data:n
    \@@_lua_check_item_data:n
  }
%    \end{macrocode}
%
% \begin{macro}{\@@_write_reports:}
%   Write reports if the \cs{marginalia} command has been used at least once, which is determined by checking whether
%   \cs{g_@@_itemno_int} is non-zero.
%    \begin{macrocode}
\cs_new:Npn\@@_write_reports:
  {
    \int_if_zero:nF{ \g_@@_itemno_int }
      {
        \@@_lua_write_problem_report:
        \@@_lua_write_item_change_report:
        \@@_lua_write_page_change_report:
      }
  }
%    \end{macrocode}
% \end{macro}
%
% Use the \texttt{enddocument/info} hook to write the reports of changes and/or problems.
%    \begin{macrocode}
\hook_gput_code:nnn{ enddocument/info }{ marginalia/report } {
  \@@_write_reports:
}
%    \end{macrocode}
%
%
%
% \subsection{Writing version data to the \texorpdfstring{\file{.aux}}{.aux} file}
%
% \begin{macro}{\@@_write_version:}
%   This command will be used to write the package version to the \file{.aux} file.
%    \begin{macrocode}
\cs_new:Npn\@@_write_version:
  {
    \iow_now:Ne\l_@@_aux_iow{
      \token_to_str:N\marginalia@version{
        \use:c{ver@marginalia.sty}
      }
    }
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Writing page data to the \texorpdfstring{\file{.aux}}{.aux} file}
%
% To compute the positions of marginal content items, certain page layout data is required. And since all the
% computation takes place at the beginning of the document, it is necessary to write this information to the \file{.aux}
% file.
%
% \begin{macro}{\g_@@_pagedatano_int}
%   Global integer variable to index page data items written to the \file{.aux} file.
%    \begin{macrocode}
\int_new:N\g_@@_pagedatano_int
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@@_write_page_data:}
%   This command will be used to write the current page data to the \file{.aux} file. It is initially defined to do
%   nothing, so that the use of \cs{marginalianewgeometry} in the preamble does not cause errors (because the
%   \file{.aux} file is not available for writing until \texttt{begindocument/end}).
%    \begin{macrocode}
\cs_set_eq:NN\@@_write_page_data:\prg_do_nothing:
\cs_new:Npn\@@_write_page_data_real:
  {
    \int_gincr:N\g_@@_pagedatano_int
    \legacy_if:nTF{@twocolumn}
      { \int_set:Nn\l_tmpa_int{2} }
      { \int_set:Nn\l_tmpa_int{1} }
    \iow_now:Ne\l_@@_aux_iow{
      \token_to_str:N\marginalia@pagedata{
        pagedatano=\int_value:w\g_@@_pagedatano_int,
        abspageno=\int_eval:n{\g_shipout_readonly_int+1},
        hoffset=\int_value:w\hoffset,
        voffset=\int_value:w\voffset,
        pageheight=\int_value:w\pageheight,
        oddsidemargin=\int_value:w\oddsidemargin,
        evensidemargin=\int_value:w\evensidemargin,
        textwidth=\int_value:w\textwidth,
        columncount=\int_value:w\l_tmpa_int,
        columnwidth=\int_value:w\columnwidth,
        columnsep=\int_value:w\columnsep,
        twoside=\bool_to_str:n{\legacy_if_p:n{@twoside}},
      }
    }
  }
%    \end{macrocode}
%   At the \texttt{begindocument/end} hook, the \file{.aux} file has been opened for writing, and so the macro
%   \cs{@@_write_page_data:} is enabled and the initial page data is written out.
%    \begin{macrocode}
\hook_gput_code:nnn{ begindocument/end }{ marginalia/initial }
  {
    \@@_write_version:
    \cs_set_eq:NN
      \@@_write_page_data:
      \@@_write_page_data_real:
    \@@_write_page_data:
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Marginal content item processing}
%
% \subsubsection{Variables}
%
% \paragraph{Variables set by \LaTeX.}
%
% \begin{macro}{\g_@@_itemno_int}
%   Global integer variable to index marginal content items.
%    \begin{macrocode}
\int_new:N\g_@@_itemno_int
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\l_@@_item_box}
%   Box variable to hold the typeset marginal content item.
%    \begin{macrocode}
\box_new:N\l_@@_item_box
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
% \l_@@_item_height_dim,
% \l_@@_item_depth_dim,
% }
%   Dimension variables to hold the height and depth of the typeset margin content item.
%    \begin{macrocode}
\dim_new:N\l_@@_item_height_dim
\dim_new:N\l_@@_item_depth_dim
%    \end{macrocode}
% \end{macro}
%
%
%
% \paragraph{Variables set by Lua.}
%
% The following variables will be set by the Lua backend via \texttt{tex.count} and \texttt{tex.dimen} when
% \cs{@@_lua_load_item_data:n} is called.
%
% \begin{macro}{\l_@@_page_int}
%   Integer variable for the page on which the marginal content item appears. This variable will be
%   made available via \cs{marginaliapage} within the \meta{content} of \cs{marginalia}.
%    \begin{macrocode}
\int_new:N\l_@@_page_int
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\l_@@_column_computed_int}
%   Integer variable for the column next to which the marginal content item appears. This variable will be
%   will be made available via \cs{marginaliacolumn} within the \meta{content} of \cs{marginalia}.
%    \begin{macrocode}
\int_new:N\l_@@_column_computed_int
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{
% \l_@@_xshift_computed_dim,
% \l_@@_yshift_computed_dim,
% }
%   Dimension variables to hold the differences in \(x\) and \(y\) coordinates between the call to \cs{marginalia} and
%   the position where the marginal content item should appear.
%    \begin{macrocode}
\dim_new:N\l_@@_xshift_computed_dim
\dim_new:N\l_@@_yshift_computed_dim
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\l_@@_side_computed_int}
%   Integer variable to indicate the side of the text block or column on which the marginal content item should be
%   placed: \(0 = \textrm{right}\) and \(1 = \textrm{left}\).
%    \begin{macrocode}
\int_new:N\l_@@_side_computed_int
%    \end{macrocode}
%   (This variable could be a boolean, but an integer is used because there is no canonical access to booleans from
%   Lua.)
% \end{macro}
%
% \begin{macro}{\l_@@_marginno_computed_int}
%   Integer variable to indicate in which margin the content will be be placed, to enable quick selection of width and
%   style: \(0 = \textrm{recto outer}\), \(1 = \textrm{recto inner}\), \(2 = \textrm{verso outer}\), \(3 = \textrm{verso
%   inner}\), \(4 = \textrm{right between}\), \(5 = \textrm{left between}\).
%    \begin{macrocode}
\int_new:N\l_@@_marginno_computed_int
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\l_@@_enabled_computed_int}
%   Integer variable to indicate whether the marginal content item is enabled: \(0 = \textrm{disabled}\),
%   \(1 = \textrm{enabled}\).
%    \begin{macrocode}
\int_new:N\l_@@_enabled_computed_int
%    \end{macrocode}
%   (This variable could be a boolean, but an integer is used because there is no canonical access to booleans from
%   Lua.)
% \end{macro}
%
%
%
% \subsubsection{Core macro}
%
% \begin{macro}{\@@_process_item:nn}
%   This macro does most of the work in setting the marginal content item. The first parameter is \meta{options}, the
%   second is \meta{content}.
%    \begin{macrocode}
\cs_new:Npn\@@_process_item:nn #1#2
  {
%    \end{macrocode}
%   First, increment the index, then enter a group where all the action will happen.
%    \begin{macrocode}
    \int_gincr:N\g_@@_itemno_int
    \group_begin:
%    \end{macrocode}
%   Process \meta{options}. These settings apply locally inside the group.
%    \begin{macrocode}
      \keys_set:nn{marginalia}{ #1 }
%    \end{macrocode}
%   Get item data from the Lua backend: the integer variables \cs{l_@@_page_int}, \cs{l_@@_column_computed_int},
%   \cs{l_@@_side_computed_int}, \cs{l_@@_enabled_computed_int}, and the dimension variables
%   \cs{l_@@_xshift_computed_dim}, and \cs{l_@@_yshift_computed_dim} are set by Lua via \texttt{tex.count} and
%   \texttt{tex.dimen}. If no data is available (if, for instance, no data has been stored from a previous run), default
%   values will be set by Lua. On later runs, the Lua backend will supply the values computed from the data written to
%   the \file{.aux} file on the previous run.
%    \begin{macrocode}
      \@@_lua_load_item_data:n
        { \int_value:w\g_@@_itemno_int }
%    \end{macrocode}
%   Choose the correct auxiliary function for typesetting, depending on which mode \TeX\ is in.
%    \begin{macrocode}
      \mode_if_math:TF
        {
          \cs_set_eq:NN
            \@@_typeset:n
            \@@_typeset_mmode:n
        }
        {
          \legacy_if:nT{@inlabel}
            { \leavevmode }
          \mode_if_horizontal:TF
            {
              \cs_set_eq:NN
                \@@_typeset:n
                \@@_typeset_hmode:n
            }
            {
              \cs_set_eq:NN
                \@@_typeset:n
                \@@_typeset_vmode:n
            }
        }
%    \end{macrocode}
%   Choose the correct box in which to typeset the item for the desired vertical alignment, which has been stored in
%   \cs{l_@@_valign_int}.
%    \begin{macrocode}
      \int_case:nn{\l_@@_valign_int}
        {
          {1}{ \cs_set_eq:NN\@@_item_box_set:Nn\vbox_set_top:Nn }
          {2}{ \cs_set_eq:NN\@@_item_box_set:Nn\vbox_set:Nn }
          {3}{ \cs_set_eq:NN\@@_item_box_set:Nn\@@_vbox_set_center:Nn }
          {4}{ \cs_set_eq:NN\@@_item_box_set:Nn\@@_vbox_set_midway:Nn }
        }
%    \end{macrocode}
%   Choose the correct horizontal separation, width, style, and mark for the item.
%    \begin{macrocode}
      \@@_set_xsep_width_style_mark:
%    \end{macrocode}
%   Typeset the \meta{content} into \cs{l_@@_item_box}. Use \cs{@parboxrestore} for brevity, even though \cs{hsize} and
%   \cs{linewidth} are subsequently set to \cs{l_@@_width_dim}. Make available \cs{marginaliapage} and
%   \cs{marginaliacolumn}.
%    \begin{macrocode}
      \@@_tagging_socket:n {marginpar/begin}
      \@@_item_box_set:Nn\l_@@_item_box{
        \@parboxrestore
        \@@_tagging_socket:n {para/restore}
        \normalfont\normalsize

        \tl_use:N\l_@@_style_tl
        \dim_set_eq:NN\hsize\l_@@_width_dim
        \dim_set_eq:NN\linewidth\hsize

        \cs_set_eq:NN\marginaliapage\l_@@_page_int
        \cs_set_eq:NN\marginaliacolumn\l_@@_column_computed_int

        \group_begin:
        \ignorespaces
        #2
        \par
        \group_end:
      }
      \@@_tagging_socket:n{marginpar/end}
%    \end{macrocode}
%   Measure \cs{l_@@_item_box}.
%    \begin{macrocode}
      \dim_set:Nn\l_@@_item_height_dim
        {\box_ht:N\l_@@_item_box}
      \dim_set:Nn\l_@@_item_depth_dim
        {\box_dp:N\l_@@_item_box}
%    \end{macrocode}
%   Everything is now ready to place the item on the page and write the necessary data to the \file{.aux} file. Use the
%   chosen auxiliary function for typesetting, and immediately use \cs{savepos} to store the callout position.
%    \begin{macrocode}
      \@@_typeset:n{
        \savepos
%    \end{macrocode}
%   Write the item data to the \file{.aux} file. All tokens that will change for future items, and which are currently
%   meaningful, are expanded now; the remainder will be expanded at shipout time, when \emph{they} are meaningful.
%    \begin{macrocode}
        \iow_shipout_e:Ne\l_@@_aux_iow{
          \token_to_str:N\marginalia@itemdata{
            itemno=\int_value:w\g_@@_itemno_int,
            abspageno=\exp_not:N\int_eval:n{\g_shipout_readonly_int},
            pageno=\exp_not:N\int_value:w\c@page,
            type=\str_use:N\int_value:w\l_@@_type_int,
            xpos=\exp_not:N\int_value:w\lastxpos,
            ypos=\exp_not:N\int_value:w\lastypos,
            height=\int_value:w\l_@@_item_height_dim,
            depth=\int_value:w\l_@@_item_depth_dim,
            pos=\int_value:w\l_@@_pos_int,
            column=\int_value:w\l_@@_column_int,
            yshift=\int_value:w\l_@@_default_yshift_dim,
            ysep~above=\int_value:w\l_@@_ysep_above_dim,
            ysep~below=\int_value:w\l_@@_ysep_below_dim,
            ysep~page~top=\int_value:w\l_@@_ysep_page_top_dim,
            ysep~page~bottom=\int_value:w\l_@@_ysep_page_bottom_dim,
          }
        }
%    \end{macrocode}
%   Finally, if the item is enabled, typeset it onto the page: shift the item by
%   \[
%     \abs[\big]{\cs{l_@@_xshift_computed_dim}} + \abs[\big]{\cs{l_@@_xsep_dim}}
%   \]
%   to the right or left (depending on \cs{l_@@_side_computed_int} in the appropriate overlap \cs{hbox}, then use
%   \cs{@@_place_item_box:} for the vertical placement. To make sure that item placement is correct in right-to-left
%   (\texttt{TRT}) text, placement happens inside a zero-width \cs{hbox} in which the text direction is set to
%   left-to-right (\texttt{TLT}). This change does not affect the content of the item, since it has already been typeset
%   into \cs{l_@@_item_box}.
%    \begin{macrocode}
      \int_if_zero:nF{\l_@@_enabled_computed_int}
        {
          \hbox_to_zero:n{
            \textdir TLT
            \int_if_zero:nTF{ \l_@@_side_computed_int }
              {
                \hbox_overlap_right:n{
                  \kern\l_@@_xshift_computed_dim
                  \tl_if_empty:NF\l_@@_mark_tl
                    {
                      \hbox_overlap_right:n{ \tl_use:N\l_@@_mark_tl }
                    }
                  \kern\l_@@_xsep_dim
                  \@@_place_item_box:
                }
              }
              {
                \hbox_overlap_left:n{
                  \@@_place_item_box:
                  \kern\l_@@_xsep_dim
                  \tl_if_empty:NF\l_@@_mark_tl
                    {
                      \hbox_overlap_left:n{ \tl_use:N\l_@@_mark_tl }
                    }
                  \kern-\l_@@_xshift_computed_dim
                }
              }
          }
        }
      }
%    \end{macrocode}
%   Close the group started near the beginning of \cs{@@_process_item:nn}.
%    \begin{macrocode}
    \group_end:
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Horizontal separation, width, style, mark selection}
%
% \begin{macro}{\@@_set_xsep_width_style_mark:}
%   Set \cs{l_@@_xsep_dim}, \cs{l_@@_width_dim}, and \cs{l_@@_style_tl}, based on \cs{l_@@_marginno_computed_int}.
%    \begin{macrocode}
\cs_new:Npn\@@_set_xsep_width_style_mark:
  {
    \int_case:nn{\l_@@_marginno_computed_int}
      {
        {0}
        {
          \cs_set_eq:NN\l_@@_xsep_dim
            \l_@@_xsep_recto_right_dim
          \cs_set_eq:NN\l_@@_width_dim
            \l_@@_width_recto_right_dim
          \cs_set_eq:NN\l_@@_style_tl
            \l_@@_style_recto_right_tl
          \cs_set_eq:NN\l_@@_mark_tl
            \l_@@_mark_recto_right_tl
        }
        {1}
        {
          \cs_set_eq:NN\l_@@_xsep_dim
            \l_@@_xsep_recto_left_dim
          \cs_set_eq:NN\l_@@_width_dim
            \l_@@_width_recto_left_dim
          \cs_set_eq:NN\l_@@_style_tl
            \l_@@_style_recto_left_tl
          \cs_set_eq:NN\l_@@_mark_tl
            \l_@@_mark_recto_left_tl
        }
        {2}
        {
          \cs_set_eq:NN\l_@@_xsep_dim
            \l_@@_xsep_verso_right_dim
          \cs_set_eq:NN\l_@@_width_dim
            \l_@@_width_verso_right_dim
          \cs_set_eq:NN\l_@@_style_tl
            \l_@@_style_verso_right_tl
          \cs_set_eq:NN\l_@@_mark_tl
            \l_@@_mark_verso_right_tl
        }
        {3}
        {
          \cs_set_eq:NN\l_@@_xsep_dim
            \l_@@_xsep_verso_left_dim
          \cs_set_eq:NN\l_@@_width_dim
            \l_@@_width_verso_left_dim
          \cs_set_eq:NN\l_@@_style_tl
            \l_@@_style_verso_left_tl
          \cs_set_eq:NN\l_@@_mark_tl
            \l_@@_mark_verso_left_tl
        }
        {4}
        {
          \cs_set_eq:NN\l_@@_xsep_dim
            \l_@@_xsep_right_between_dim
          \cs_set_eq:NN\l_@@_width_dim
            \l_@@_width_right_between_dim
          \cs_set_eq:NN\l_@@_style_tl
            \l_@@_style_right_between_tl
          \cs_set_eq:NN\l_@@_mark_tl
            \l_@@_mark_right_between_tl
        }
        {5}
        {
          \cs_set_eq:NN\l_@@_xsep_dim
            \l_@@_xsep_left_between_dim
          \cs_set_eq:NN\l_@@_width_dim
            \l_@@_width_left_between_dim
          \cs_set_eq:NN\l_@@_style_tl
            \l_@@_style_left_between_tl
          \cs_set_eq:NN\l_@@_mark_tl
            \l_@@_mark_left_between_tl
        }
      }
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Auxiliary box macros}
%
% \begin{macro}{\@@_vbox_set_center:Nn}
%   Typesets the second parameter at natural height and stores the result inside a box register supplied as the first
%   parameter, with the baseline being mid-way between the top and bottom of the box.
%    \begin{macrocode}
\cs_new:Npn \@@_vbox_set_center:Nn #1#2
  {
    \vbox_set_top:Nn #1{#2}
    \dim_set:Nn \l_tmpa_dim{ \box_ht:N#1 + \box_dp:N#1 }
    \box_set_ht:Nn #1 { .5\l_tmpa_dim }
    \box_set_dp:Nn #1 { .5\l_tmpa_dim }
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \begin{macro}{\@@_vbox_set_midway:Nn}
%   Typesets the second parameter at natural height and stores the result inside a box register supplied as the first
%   parameter, with the baseline being mid-way between the top and bottom baselines of the items in the box.
%    \begin{macrocode}
\cs_new:Npn \@@_vbox_set_midway:Nn #1#2
  {
%    \end{macrocode}
%   The distance between the topmost and bottommost baselines is equal to the difference in depths between the results
%   of typesetting using a \cs{vtop} and a \cs{vbox}. So typeset into both (suspending tagging for the latter),
%   calculate the difference, and adjust the height and depth of the first.
%    \begin{macrocode}
    \vbox_set_top:Nn #1{#2}
    \tag_suspend:n{ marginalia }
    \vbox_set:Nn \l_tmpa_box {#2}
    \tag_resume:n{ marginalia }
    \dim_set:Nn \l_tmpa_dim{ \box_dp:N#1 - \box_dp:N\l_tmpa_box}
    \box_set_ht:Nn #1 { \box_ht:N#1 + .5\l_tmpa_dim }
    \box_set_dp:Nn #1 { \box_dp:N#1 - .5\l_tmpa_dim }
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Placement macros}
%
% \begin{macro}{\@@_place_item_box:}
%   Place the item that has been set in \cs{l_@@_item_box}, vertically shifted by \cs{l_@@_yshift_computed_dim} and
%   \cs{smash}ed to avoid altering vertical spacing in the main text.
%    \begin{macrocode}
\cs_new:Npn\@@_place_item_box:
  {
    \smash
      {
        \box_move_up:nn{\l_@@_yshift_computed_dim}
          {
            \box_use:N\l_@@_item_box
          }
      }
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \begin{macro}{
%   \@@_typeset_mmode:n,
%   \@@_typeset_hmmode:n,
%   \@@_typeset_vmode:n,
% }
%   These three macros handle typesetting in math mode, horizontal mode, and vertical mode. Nothing special needs to be
%   done in math mode. In horizontal mode, \cs{@bsphack}\ldots\cs{@esphack} avoids double spacing. In vertical mode,
%   \cs{if@nobreak} is saved, a new paragraph is started, the item is typeset, the paragraph is ended, a vertical skip
%   of \(-\cs{baselineskip}\) is added, which should `hide' that invisible paragraph, and \cs{if@nobreak} is restored to
%   the saved value.
%    \begin{macrocode}
\cs_new:Npn\@@_typeset_mmode:n #1
  {
    #1
  }
\cs_new:Npn\@@_typeset_hmode:n #1
  {
    \@bsphack
    #1
    \@esphack
  }
\bool_new:N\l_@@_nobreak_bool
\cs_new:Npn\@@_typeset_vmode:n #1
  {
    \bool_set:Nn\l_@@_nobreak_bool{ \legacy_if_p:n{@nobreak} }
    \nobreak\noindent #1\par
    \skip_vertical:n{-\baselineskip}
    \legacy_if_gset:nn{ @nobreak }{ \l_@@_nobreak_bool }
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{User commands}
%
% Finally, set up the commands for the user.
%
% \begin{macro}{\marginalia}
%   This is the main user command for creating a marginal content item. This macro does nothing but hand off to
%   \cs{@@_process_item:nn}.
%    \begin{macrocode}
\NewDocumentCommand{\marginalia}{ O{} +m }
  {
    \@@_process_item:nn{#1}{#2}
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \begin{macro}{\marginaliasetup}
%   The user command to set the configuration. This macro does nothing but hand off to
%   \cs{@@_setup:n}.
%    \begin{macrocode}
\NewDocumentCommand{\marginaliasetup}{ m }
  {
    \@@_setup:n{ #1 }
  }
%    \end{macrocode}
% \end{macro}
%
%
%
% \begin{macro}{\marginalianewgeometry}
%   The user command to signal that the page geometry has been changed.
%    \begin{macrocode}
\NewDocumentCommand{\marginalianewgeometry}{}
  {
    \@@_write_page_data:
  }
%    \end{macrocode}
% \end{macro}
%
%
%
%    \begin{macrocode}
%</package>
%    \end{macrocode}
%
%
%
% \section{Implementation (Lua backend)}
%
%    \begin{macrocode}
%<*lua>
%    \end{macrocode}
%
%
%
% \subsection{Initial set-up}
%
% Module identification/version information.
%    \begin{macrocode}
local module_name = 'marginalia'
local marginalia_module = {
  name        = module_name,
  version     = '0.84.3',
  date        = '2026-08-12',
  description = 'marginalia',
  author      = 'Alan J. Cain',
  copyright   = 'Alan J. Cain',
  license     = 'LPPL v1.3c'
}
luatexbase.provides_module(marginalia_module)
%    \end{macrocode}
%
%
%
% \subsection{Message functions}
%
% \begin{macro}[int]{info,warning}
%   Functions for writing info or warning messages. First argument is used as a format string for later arguments.
%    \begin{macrocode}
local function info(s,...)
  luatexbase.module_info(module_name,s:format(...))
end
local function warning(s,...)
  luatexbase.module_warning(module_name,s:format(...))
end
local function error_(s,...)
  luatexbase.module_error(module_name,s:format(...))
end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Module variables}
%
% Module tables for page_data and item_data.
%    \begin{macrocode}
local PAGE_DATA_MAIN_TABLE = {}
local ITEM_DATA_MAIN_TABLE = {}
%    \end{macrocode}
% Module tables for compiling reports.
%    \begin{macrocode}
local PROBLEM_REPORT_TABLE = {}
local PAGE_CHANGE_REPORT_TABLE = {}
local ITEM_CHANGE_REPORT_TABLE = {}
%    \end{macrocode}
% Module variable indicating whether the document binding is on the left.
%    \begin{macrocode}
local binding_left = true

local function set_binding_left(value)
  binding_left = value
end
%    \end{macrocode}
%
%
%
% \subsection{Constants}
%
% Type constants. These match the possible values for the \key{type} key.
%    \begin{macrocode}
local TYPE_NORMAL = 1
local TYPE_FIXED = 2
local TYPE_OPTFIXED = 3
%    \end{macrocode}
% Position constants. These match the possible values for the \key{pos} key.
%    \begin{macrocode}
local POS_AUTO = 1
local POS_REVERSE = 2
local POS_OUTER = 3
local POS_INNER = 4
local POS_RIGHT = 5
local POS_LEFT = 6
local POS_NEAREST = 7
%    \end{macrocode}
%
%
%
% \subsection{Keys for tables}
%
% The strings listed in this subsection are constants used to index the tables. Also listed are the types of
% values that are indexed by each key. Note that values listed below as "dimensions" are actually integers, giving the
% dimension in \TeX\ scaled points (sp)
%
%
%
% \subsubsection{Keys for both page and item data tables}
%
% Integer: Absolute page number in output file (not on-page number), used in both page_data and item_data tables
%    \begin{macrocode}
local KEY_ABSPAGENO = 'abspageno'
%    \end{macrocode}
% Boolean: Used to mark page_data or item_data as checked when the .aux file is read back at the end of the document
%    \begin{macrocode}
local KEY_CHECKED = 'checked'
%    \end{macrocode}
%
%
%
% \subsubsection{Keys for page data tables, layout etc.}
%
% Integer: Used only to distinguish instances of data written to .aux file
%    \begin{macrocode}
local KEY_PAGEDATANO = 'pagedatano'
%    \end{macrocode}
% Dimensions: Value of next two will always be equivalent of \qty{1}{\inch}, but it is simpler to keep all geometry
% data together.
%    \begin{macrocode}
local KEY_HOFFSETORIGIN = 'hoffsetorigin'
local KEY_VOFFSETORIGIN = 'voffsetorigin'
%    \end{macrocode}
% Dimensions: corresponding to obvious \LaTeX\ dimensions
%    \begin{macrocode}
local KEY_HOFFSET = 'hoffset'
local KEY_VOFFSET = 'voffset'
local KEY_PAGEHEIGHT = 'pageheight'
local KEY_ODDSIDEMARGIN = 'oddsidemargin'
local KEY_EVENSIDEMARGIN = 'evensidemargin'
local KEY_TEXTWIDTH = 'textwidth'
local KEY_COLUMNWIDTH = 'columnwidth'
local KEY_COLUMNSEP = 'columnsep'
%    \end{macrocode}
% Integer: either \(1\) or \(2\), depending on whether \LaTeX\ was in one- or two-column mode
%    \begin{macrocode}
local KEY_COLUMNCOUNT = 'columncount'
%    \end{macrocode}
% Boolean: true iff \LaTeX\ is in twoside mode
%    \begin{macrocode}
local KEY_TWOSIDE = 'twoside'
%    \end{macrocode}
%
%
%
% \subsubsection{Keys for item data tables}
%
% Integer: Used to identify data with item
%    \begin{macrocode}
local KEY_ITEMNO = 'itemno'
%    \end{macrocode}
% Integer: On-page number
%    \begin{macrocode}
local KEY_PAGENO = 'pageno'
%    \end{macrocode}
% Dimensions: \(x\) and \(y\) positions of call to \cs{marginalia}
%    \begin{macrocode}
local KEY_XPOS = 'xpos'
local KEY_YPOS = 'ypos'
%    \end{macrocode}
% Dimensions: Height and depth of typeset item
%    \begin{macrocode}
local KEY_HEIGHT = 'height'
local KEY_DEPTH = 'depth'
%    \end{macrocode}
% Integer: Specified type, following \luavar{TYPE_*}
%    \begin{macrocode}
local KEY_TYPE = 'type'
%    \end{macrocode}
% Integer: corresponds to value of \key{pos} key and the constants \luavar{POS_*}: \(1 = \texttt{auto}\),
% \(2 = \texttt{reverse}\), \(3 = \texttt{outer}\), \(4 = \texttt{inner}\), \(5 = \texttt{right}\),
% \(6 = \texttt{left}\), \(7 = \texttt{nearest}\).
%    \begin{macrocode}
local KEY_POS = 'pos'
%    \end{macrocode}
% Integer: corresponds to value of \key{column} key: \(-1 = \texttt{auto}\), \(0 = \texttt{one}\), \(1 = \texttt{left}\),
% \(2 = \texttt{right}\)
%    \begin{macrocode}
local KEY_COLUMN = 'column'
%    \end{macrocode}
% Dimension: specified vertical shift
%    \begin{macrocode}
local KEY_YSHIFT = 'yshift'
%    \end{macrocode}
% Dimensions: specified vertical separations
%    \begin{macrocode}
local KEY_YSEP_ABOVE = 'ysep above'
local KEY_YSEP_BELOW = 'ysep below'
local KEY_YSEP_PAGE_TOP = 'ysep page top'
local KEY_YSEP_PAGE_BOTTOM = 'ysep page bottom'
%    \end{macrocode}
%
% \medskip\noindent
% The preceding keys refer to values that will be supplied from \LaTeX. The remaining values will be computed in Lua
% and passed back to \LaTeX.
%
% \medskip\noindent
% Integer: column in which the call to \cs{marginalia} was located: \(0 = \textrm{one-column}\),
% \(1 = \textrm{left}\), \(2 = \textrm{right}\)
%    \begin{macrocode}
local KEY_COLNO_COMPUTED = 'colno computed'
%    \end{macrocode}
% Dimension: Horizontal shift between the call to \cs{marginalia} and the margin in which the item should be located
%    \begin{macrocode}
local KEY_XSHIFT_COMPUTED = 'xshift computed'
%    \end{macrocode}
% Dimension: Computed vertical shift
%    \begin{macrocode}
local KEY_YSHIFT_COMPUTED = 'yshift computed'
%    \end{macrocode}
% Integer: Side of text on which the item will appear: \(0 = \textrm{right}\), \(1 = \textrm{left}\)
%    \begin{macrocode}
local KEY_SIDE_COMPUTED = 'side computed'
%    \end{macrocode}
% Integer: Number of margin in which the item will appear, \(0 = \textrm{recto right}\), \(1 = \textrm{recto left}\),
% \(2 = \textrm{verso left}\), \(3 = \textrm{verso right}\), \(4 = \textrm{right between}\),
% \(5 = \textrm{left between}\)
%    \begin{macrocode}
local KEY_MARGINNO_COMPUTED = 'marginno computed'
%    \end{macrocode}
% Boolean: Whether the item will actually appear on the page
%    \begin{macrocode}
local KEY_ENABLED_COMPUTED = 'enabled computed'
%    \end{macrocode}
%
%
%
% \subsection{Utility functions}
%
% \begin{macro}[int]{list_filter}
%   Take a list \luavar{t} and remove from it any elements for which the function
%   \luavar{f} does not return true. (The index \luavar{j} is always the destination index to which a `keep' element
%   is moved.)\sidenote{Code adapted from \url{https://stackoverflow.com/a/53038524}.}
%    \begin{macrocode}
local function list_filter(t, f)
  local j = 1
  local n = #t

  for i=1,n do
    if (f(t[i])) then
      if (i ~= j) then
        t[j] = t[i]
        t[i] = nil
      end
      j = j + 1
    else
      t[i] = nil
    end
  end

end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{list_filter}
%   Return boolean true iff \luavar{s} is exactly the string `\luavar{true}'.
%    \begin{macrocode}
local function toboolean(s)
  return s == "true"
end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{get_data_page_number}
%   Take a item or page data and return a human-readable string indicating the page to which the data pertains.
%    \begin{macrocode}
local function get_data_page_number(data)
  local pageno = data[KEY_PAGENO]
  if pageno ~= nil then
    return 'p' .. pageno .. ' (' .. data[KEY_ABSPAGENO] .. ')'
  else
    return data[KEY_ABSPAGENO]
  end
end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Generic page/item data functions}
%
% \begin{macro}[int]{parse_data}
% Parse \luavar{keyvalue_string} and return the corresponding data as a table. The \luavar{keyvalue_string} is
% expected to be of precisely the kind written to the \file{.aux} file as the parameter of \cs{marginalia@pagedata} or
% \cs{marginalia@notedata}.
%
% Ignore any keys in \luavar{keyvalue_string} that are not listed in \luavar{conversion_table}. Fill in any missing
% value with values from \luavar{defaults_table}.
%
% \luavar{conversion_table} is indexed by possible keys, with values equal to functions to convert the corresponding
% value string to the value that should appear in the returned table.
%
% \luavar{defaults_table} is indexed by keys that \emph{will} appear in the returned table, using the corresponding
% value unless it was given in \luavar{keyvalue_string} and the key appeared in \luavar{conversion_table}.
%    \begin{macrocode}
local function parse_data(keyvalue_string,conversion_table,defaults_table)

  local key
  local value
  local result = {}

  for s in string.gmatch(keyvalue_string,'([^,]+)') do

    key,value = string.match(s,'^(.+)=(.+)$')
    local conv = conversion_table[key]
    if conv ~= nil then
      result[key] = conv(value)
    end

  end

  for key,value in pairs(defaults_table) do
    if not(result[key] ~= nil) then
      result[key] = value
    end
  end

  return result

end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{check_data}
%   Check \luavar{keyvalue_string} against stored data. If it is new or has changed, append a report to
%   \luavar{report_table}. Set the \luavar{KEY_CHECKED} of the data item to true.
%
%   The \luavar{keyvalue_string} is processed using \luavar{conversion_table} and \luavar{defaults_table} as per the
%   \luavar{parse_data} function. The resulting table is compared to the table in \luavar{data_table} with the same value
%   whose key is \luavar{data_table_key}. The tables are compared using the fields indexed by keys in
%   \luavar{conversion_table}.
%    \begin{macrocode}
local function check_data(keyvalue_string,conversion_table,defaults_table,
                          data_table,data_table_key_field,report_table)

  local new_data = parse_data(keyvalue_string,
                              conversion_table,defaults_table)

  local data_table_key = new_data[data_table_key_field]

  local stored_data = data_table[data_table_key]
  if stored_data == nil then
    table.insert(
      report_table,
      get_data_page_number(new_data) .. ' New'
    )
  else
    local change_report = ''
    for k,_ in pairs(conversion_table) do
      if stored_data[k] ~= new_data[k] then
        change_report = change_report
          .. ' ' .. k .. ':' ..
          tostring(stored_data[k]) .. '->' .. tostring(new_data[k])
      end
    end
    if change_report ~= '' then
      table.insert(
        report_table,
        get_data_page_number(new_data) .. ' ' .. change_report
      )
    end
    stored_data[KEY_CHECKED] = true
  end

end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{check_removed_data}
%   Check whether data have been removed from \luavar{data_table}, which corresponds to some entry having the value
%   of \luavar{KEY_CHECKED} being false. In this case, append a report to \luavar{report_table}.
%    \begin{macrocode}
local function check_removed_data(data_table,report_table)
  for _,data in pairs(data_table) do
    if not data[KEY_CHECKED] then
      table.insert(
        report_table,
        ' Removed'
      )
      break
    end
  end
end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Processing of page data from \texorpdfstring{\file{.aux}}{.aux} file}
%
% Conversion and default tables.
%    \begin{macrocode}
local PAGE_DATA_CONVERSION_TABLE = {
  [KEY_PAGEDATANO] = tonumber,
  [KEY_ABSPAGENO] = tonumber,
  [KEY_HOFFSETORIGIN] = tonumber,
  [KEY_VOFFSETORIGIN] = tonumber,
  [KEY_HOFFSET] = tonumber,
  [KEY_VOFFSET] = tonumber,
  [KEY_PAGEHEIGHT] = tonumber,
  [KEY_ODDSIDEMARGIN] = tonumber,
  [KEY_EVENSIDEMARGIN] = tonumber,
  [KEY_COLUMNCOUNT] = tonumber,
  [KEY_COLUMNWIDTH] = tonumber,
  [KEY_COLUMNSEP] = tonumber,
  [KEY_TEXTWIDTH] = tonumber,
  [KEY_TWOSIDE] = toboolean,
}
local PAGE_DATA_DEFAULT_TABLE = {
  [KEY_PAGEDATANO] = 0,
  [KEY_ABSPAGENO] = 0,
  [KEY_HOFFSETORIGIN] = tex.sp('1in'),
  [KEY_VOFFSETORIGIN] = tex.sp('1in'),
  [KEY_HOFFSET] = tex.dimen['hoffset'],
  [KEY_VOFFSET] = tex.dimen['voffset'],
  [KEY_PAGEHEIGHT] = tex.dimen['pageheight'],
  [KEY_ODDSIDEMARGIN] = tex.dimen['oddsidemargin'],
  [KEY_EVENSIDEMARGIN] = tex.dimen['evensidemargin'],
  [KEY_TEXTWIDTH] = tex.dimen['textwidth'],
  [KEY_COLUMNWIDTH] = tex.dimen['columnwidth'],
  [KEY_COLUMNSEP] = tex.dimen['columnsep'],
  [KEY_COLUMNCOUNT] = 1,
  [KEY_TWOSIDE] = false,
  [KEY_CHECKED] = false,
}
%    \end{macrocode}
%
% \begin{macro}[int]{store_page_data}
%   Store page data supplied by \luavar{keyvalue_string} in \luavar{PAGE_DATA_MAIN_TABLE}.
%    \begin{macrocode}
local function store_page_data(keyvalue_string)

  local page_data = parse_data(keyvalue_string,
                               PAGE_DATA_CONVERSION_TABLE,
                               PAGE_DATA_DEFAULT_TABLE)

  PAGE_DATA_MAIN_TABLE[page_data[KEY_PAGEDATANO]] = page_data

end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{store_default_page_data}
%   Store default page data in \luavar{PAGE_DATA_MAIN_TABLE}, so that there is some data to work with when
%   computing item positions, even on a first run, when no page data has been written to the \file{.aux} file.
%    \begin{macrocode}
local function store_default_page_data()

  default_page_data = parse_data('',
                                 PAGE_DATA_CONVERSION_TABLE,
                                 PAGE_DATA_DEFAULT_TABLE)

  default_page_data[KEY_ABSPAGENO] = 1
  default_page_data[KEY_CHECKED] = true

  PAGE_DATA_MAIN_TABLE[0] = default_page_data

end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{check_page_data}
% Check whether page_data supplied by keyvalue_string differs from that in \luavar{PAGE_DATA_MAIN_TABLE}, appending
% reports to \luavar{PAGE_CHANGE_REPORT_TABLE} if so.
%    \begin{macrocode}
local function check_page_data(keyvalue_string)

  check_data(keyvalue_string,
             PAGE_DATA_CONVERSION_TABLE,PAGE_DATA_DEFAULT_TABLE,
             PAGE_DATA_MAIN_TABLE,KEY_PAGEDATANO,
             PAGE_CHANGE_REPORT_TABLE)

end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Processing of item data from \texorpdfstring{\file{.aux}}{.aux} file}
%
% Conversion and default tables.
%    \begin{macrocode}
local ITEM_DATA_CONVERSIONS = {
  [KEY_ITEMNO] = tonumber,
  [KEY_ABSPAGENO] = tonumber,
  [KEY_PAGENO] = tonumber,
  [KEY_XPOS] = tonumber,
  [KEY_YPOS] = tonumber,
  [KEY_HEIGHT] = tonumber,
  [KEY_DEPTH] = tonumber,
  [KEY_TYPE] = tonumber,
  [KEY_POS] = tonumber,
  [KEY_COLUMN] = tonumber,
  [KEY_YSHIFT] = tonumber,
  [KEY_YSEP_ABOVE] = tonumber,
  [KEY_YSEP_BELOW] = tonumber,
  [KEY_YSEP_PAGE_TOP] = tonumber,
  [KEY_YSEP_PAGE_BOTTOM] = tonumber,
  [KEY_CHECKED] = toboolean,
}
local ITEM_DATA_DEFAULTS = {
  [KEY_ITEMNO] = 0,
  [KEY_ABSPAGENO] = 1,
  [KEY_PAGENO] = 1,
  [KEY_XPOS] = 0,
  [KEY_YPOS] = 0,
  [KEY_HEIGHT] = 0,
  [KEY_DEPTH] = 0,
  [KEY_TYPE] = 0,
  [KEY_POS] = 0,
  [KEY_COLUMN] = -1,
  [KEY_YSHIFT] = 0,
  [KEY_YSEP_ABOVE] = tex.dimen['marginparpush'],
  [KEY_YSEP_BELOW] = tex.dimen['marginparpush'],
  [KEY_YSEP_PAGE_TOP] = tex.dimen['marginparpush'],
  [KEY_YSEP_PAGE_BOTTOM] = tex.dimen['marginparpush'],
  [KEY_COLNO_COMPUTED] = 0,
  [KEY_XSHIFT_COMPUTED] = 0,
  [KEY_YSHIFT_COMPUTED] = 0,
  [KEY_SIDE_COMPUTED] = 0,
  [KEY_MARGINNO_COMPUTED] = 0,
  [KEY_ENABLED_COMPUTED] = true,
  [KEY_CHECKED] = false,
}
%    \end{macrocode}
% \luavar{ITEM_DATA_DEFAULTS} is also used by \luafunc{load_item_data} when no stored item data is found in
% \luavar{ITEM_DATA_MAIN_TABLE}.

% \begin{macro}[int]{store_item_data}
%   Store item_data supplied by \luavar{keyvalue_string} in \luavar{ITEM_DATA_MAIN_TABLE}.
%    \begin{macrocode}
local function store_item_data(keyvalue_string)

  local item = parse_data(keyvalue_string,
                          ITEM_DATA_CONVERSIONS,
                          ITEM_DATA_DEFAULTS)

  ITEM_DATA_MAIN_TABLE[item[KEY_ITEMNO]] = item

end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{check_item_data}
%   Check whether item_data supplied by \luavar{keyvalue_string} differs from that in \luavar{ITEM_DATA_MAIN_TABLE},
%   appending reports to \luavar{ITEM_CHANGE_REPORT_TABLE} if so.
%    \begin{macrocode}
local function check_item_data(keyvalue_string)

  check_data(keyvalue_string,
             ITEM_DATA_CONVERSIONS,ITEM_DATA_DEFAULTS,
             ITEM_DATA_MAIN_TABLE,KEY_ITEMNO,
             ITEM_CHANGE_REPORT_TABLE)

end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Writing reports}
%
% \begin{macro}[int]{write_report}
%   If \luavar{report_table} is non-empty, write the data contained in it as a module warning. Use at most
%   \luavar{max_length} items. \luavar{text} is written before the report. If \luavar{max_length} is non-zero,
%   \luavar{after_items_text} is written after the items. \luavar{noun} refers to the kind of items.
%    \begin{macrocode}
local function write_report(report_table,max_length,text,after_items_text,noun)

  if #report_table == 0 then
    return
  end

  if max_length == 0 then
    warning(text)
    return
  end

  local report_text
  local report_length

  if #report_table <= max_length then
    report_length = #report_table
    report_text = ' Here are the ' .. noun .. ':\n'
  else
    report_length = max_length
    report_text = ' Here are the first ' .. report_length .. ' ' .. noun .. ':\n'
  end

  for i=1,report_length do
    report_text = report_text .. report_table[i]
    if i < report_length then
      report_text = report_text .. '\n'
    end
  end

  warning(text .. ' ' .. report_text .. '\n' .. after_items_text)

end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{write_problem_report}
% Write a report about placement problems to \TeX\ in a format suitable for a package warning.
%    \begin{macrocode}
local function write_problem_report()

  write_report(
    PROBLEM_REPORT_TABLE,
    tex.count['l__marginalia_max_problem_int'],
    'Problems in placement.',
    'Problems listed at \\end{document}',
    'problems'
  )


end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{write_item_change_report}
%   Write a report about changes in item data to \TeX\ in a format suitable for a package warning.
%    \begin{macrocode}
local function write_item_change_report()

  check_removed_data(ITEM_DATA_MAIN_TABLE,ITEM_CHANGE_REPORT_TABLE)
  write_report(
    ITEM_CHANGE_REPORT_TABLE,
    tex.count['l__marginalia_max_item_data_change_int'],
    'Changes in item data. Rerun to get correct placement.',
    'Changes listed at \\end{document}',
    'changes'
  )

end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{write_page_change_report}
%   Write a report about changes in page data to \TeX\ in a format suitable for a package warning.
%    \begin{macrocode}
local function write_page_change_report()

  check_removed_data(PAGE_DATA_MAIN_TABLE,PAGE_CHANGE_REPORT_TABLE)
  write_report(
    PAGE_CHANGE_REPORT_TABLE,
    tex.count['l__marginalia_max_page_data_change_int'],
    'Changes in page data. Rerun to get correct placement.',
    'Changes listed at \\end{document}',
    'changes'
  )

end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Computing horizontal positions}
%
% It is necessary to determine whether an item should be placed on the right or left of the text block, and in which
% column it lies. The following lookup tables are used.
%
% The value found in \luavar{RIGHTSIDE_LOOKUP_TABLE} is either \luavar{true} (right) or \luavar{false} (left). It is
% indexed by whether the binding is on the left (\luavar{true}/\luavar{false}), whether the item is on a recto page
% (\luavar{true}/\luavar{false}), whether it pertains to single-column text, the left column, or the right column
% (\luavar{0}/\luavar{1}/\luavar{2}), and the value of \key{pos} being either \val{auto} or \val{reverse}.
%
% \luavar{RIGHTSIDE_LOOKUP_TABLE} is only used for \keyvalue{pos}{auto}, \val{reverse}, \val{outer}, \val{inner} and
% the result reflects binding-on-the-left.
%    \begin{macrocode}
local RIGHTSIDE_LOOKUP_TABLE = {
  [true] = {
    [true] = {
      [0] = {
        [POS_AUTO]=true,  [POS_REVERSE]=false, [POS_OUTER]=true,  [POS_INNER]=false,
      },
      [1] = {
        [POS_AUTO]=false, [POS_REVERSE]=true,  [POS_OUTER]=true,  [POS_INNER]=false,
      },
      [2] = {
        [POS_AUTO]=true,  [POS_REVERSE]=false, [POS_OUTER]=true,  [POS_INNER]=false,
      },
    },
    [false] = {
      [0] = {
        [POS_AUTO]=false, [POS_REVERSE]=true,  [POS_OUTER]=false, [POS_INNER]=true,
      },
      [1] = {
        [POS_AUTO]=false, [POS_REVERSE]=true,  [POS_OUTER]=false, [POS_INNER]=true,
      },
      [2] = {
        [POS_AUTO]=true,  [POS_REVERSE]=false, [POS_OUTER]=false, [POS_INNER]=true,
      },
    },
  },
  [false] = {
    [true] = {
      [0] = {
        [POS_AUTO]=false, [POS_REVERSE]=true,  [POS_OUTER]=false, [POS_INNER]=true,
      },
      [1] = {
        [POS_AUTO]=false, [POS_REVERSE]=true,  [POS_OUTER]=false, [POS_INNER]=true,
      },
      [2] = {
        [POS_AUTO]=true,  [POS_REVERSE]=false, [POS_OUTER]=false, [POS_INNER]=true,
      },
    },
    [false] = {
      [0] = {
        [POS_AUTO]=true,  [POS_REVERSE]=false, [POS_OUTER]=true,  [POS_INNER]=false,
      },
      [1] = {
        [POS_AUTO]=false, [POS_REVERSE]=true,  [POS_OUTER]=true,  [POS_INNER]=false,
      },
      [2] = {
        [POS_AUTO]=true,  [POS_REVERSE]=false, [POS_OUTER]=true,  [POS_INNER]=false,
      },
    },
  },
}
%    \end{macrocode}
% The value found in \luavar{MARGINNO_LOOKUP_TABLE} ranges from \luavar{0} to \luavar{5} (see
% \luavar{KEY_MARGINNO_COMPUTED} for the meaning of these values). It is indexed by whether the item is on a recto
% page (\luavar{true}/\luavar{false}), whether it pertains to single-column text, the left column, or the right column
% (\luavar{0}/\luavar{1}/\luavar{2}), and whether it is to be placed on the right of the text block
% (\luavar{true}/\luavar{false}).
%    \begin{macrocode}
local MARGINNO_LOOKUP_TABLE = {
  [true] = {
    [0] = {
      [false] = 1,
      [true] = 0,
    },
    [1] = {
      [false] = 1,
      [true] = 5,
    },
    [2] = {
      [false] = 4,
      [true] = 0,
    },
  },
  [false] = {
    [0] = {
      [false] = 3,
      [true] = 2,
    },
    [1] = {
      [false] = 3,
      [true] = 5,
    },
    [2] = {
      [false] = 4,
      [true] = 2,
    },
  },
}
%    \end{macrocode}
%
% \begin{macro}[int]{compute_items_horizontal}
%   For every \luavar{item_data} in \luavar{item_data_list}, compute the fields relevant to horizontal positioning,
%   namely \luavar{KEY_COLNO_COMPUTED}, \luavar{KEY_XSHIFT_COMPUTED}, \luavar{KEY_SIDE_COMPUTED}, based on the layout
%   information in page_data. Every item described in \luavar{item_data_list} is assumed to be on the same page.
%    \begin{macrocode}
local function compute_items_horizontal(item_data_list,page_data)
%    \end{macrocode}
%   Immediately return if \luavar{item_data_list} is empty, to avoid edge cases.
%    \begin{macrocode}
  if #item_data_list == 0 then
    return
  end
%    \end{macrocode}
%   Information used frequently and which is the same for every item.
%    \begin{macrocode}
  local pageno = item_data_list[1][KEY_PAGENO]
  local twoside = page_data[KEY_TWOSIDE]
  local recto = ((pageno % 2) == 1) or (not twoside)
  local columncount = page_data[KEY_COLUMNCOUNT]
%    \end{macrocode}
%   Tables to contain the \(x\)-coordinates of left edge, right edge, and middle of the current text, whether a single
%   column (index 0), the left column (index 1), or the right column (index 2).
%    \begin{macrocode}
  local x_textleft = {}
  local x_textright = {}
  local x_textmiddle = {}
%    \end{macrocode}
%   First, compute necessary dimensions for single-column text, since most of these calculations would be used anyway
%   for two-column text. The terms used in calculating \luavar{x_textleft[0]} respectively take one to the origin of
%   \cs{hoffset}, to the origin of \cs{oddsidemargin} and \cs{evensidemargin}, and to the left-hand side of the text
%   block.
%    \begin{macrocode}
  if recto then
    x_textleft[0] = (
      page_data[KEY_HOFFSETORIGIN]
      + page_data[KEY_HOFFSET]
      + page_data[KEY_ODDSIDEMARGIN]
    )
    x_textright[0] = (
      x_textleft[0]
      + page_data[KEY_TEXTWIDTH]
    )
  else
    x_textleft[0] = (
      page_data[KEY_HOFFSETORIGIN]
      + page_data[KEY_HOFFSET]
      + page_data[KEY_EVENSIDEMARGIN]
    )
    x_textright[0] = (
      x_textleft[0]
      + page_data[KEY_TEXTWIDTH]
    )
  end
  x_textmiddle[0] = (x_textleft[0] + x_textright[0])/2


  if columncount == 1 then
%    \end{macrocode}
%    If the page is one-column, the field \luavar{KEY_COLNO_COMPUTED} can be set immediately for every item_data.
%    \begin{macrocode}
    for i=1,#item_data_list do
      item_data_list[i][KEY_COLNO_COMPUTED] = 0
    end
  else
%    \end{macrocode}
%    If the page is two-column, calculate the \(x\)-coordinates of the left and right edges and the mid-point of each
%    column.
%    \begin{macrocode}
    x_textleft[1] = x_textleft[0]
    x_textright[1] = (
      x_textleft[1]
      + page_data[KEY_COLUMNWIDTH]
    )
    x_textmiddle[1] = (x_textleft[1] + x_textright[1])/2

    x_textleft[2] = (
      x_textright[1]
      + page_data[KEY_COLUMNSEP]
    )
    x_textright[2] = (
      x_textleft[2]
      + page_data[KEY_COLUMNWIDTH]
    )
    x_textmiddle[2] = (x_textleft[2] + x_textright[2])/2

%    \end{macrocode}
%   Calculate the cut-off (mid-way between the columns) that distinguishes items from left and right columns.
%    \begin{macrocode}
    local left_column_x_limit = (
      x_textright[1]
      + .5*page_data[KEY_COLUMNSEP]
    )
%    \end{macrocode}
%   Now set the field \luavar{KEY_COLNO_COMPUTED} for each item.
%    \begin{macrocode}
    for i=1,#item_data_list do
      local item_data = item_data_list[i]

      if item_data[KEY_COLUMN] >= 0 then
        item_data[KEY_COLNO_COMPUTED] = item_data[KEY_COLUMN]
      else
        if item_data[KEY_XPOS] <= left_column_x_limit then
          item_data[KEY_COLNO_COMPUTED] = 1
        else
          item_data[KEY_COLNO_COMPUTED] = 2
        end
      end
    end

  end
%    \end{macrocode}
%   For every item_data in item_data_list, compute and set the fields \luavar{KEY_SIDE_COMPUTED},
%   \luavar{KEY_XSHIFT_COMPUTED}, and \luavar{KEY_MARGINNO_COMPUTED}.
%    \begin{macrocode}
  for i=1,#item_data_list do
    local item = item_data_list[i]

    local pos = item[KEY_POS]
    local colnocomputed = item[KEY_COLNO_COMPUTED]

    if pos == POS_LEFT then
      rightside = false
    elseif pos == POS_RIGHT then
      rightside = true
    elseif pos == POS_NEAREST then
      rightside = (item[KEY_XPOS] >= x_textmiddle[colnocomputed])
    else
%    \end{macrocode}
%   (In this case, \luavar{pos} must be \luavar{POS_AUTO}, \luavar{POS_REVERSE}, \luavar{POS_OUTER}, or
%   \luavar{POS_INNER}.)
%    \begin{macrocode}
      rightside = RIGHTSIDE_LOOKUP_TABLE[binding_left][recto][colnocomputed][pos]
    end

    local marginno = MARGINNO_LOOKUP_TABLE[recto][colnocomputed][rightside]

    if rightside then
      item[KEY_SIDE_COMPUTED] = 0
      item[KEY_XSHIFT_COMPUTED] = -item[KEY_XPOS]
                                  + x_textright[colnocomputed]
    else
      item[KEY_SIDE_COMPUTED] = 1
      item[KEY_XSHIFT_COMPUTED] = -item[KEY_XPOS]
                                  + x_textleft[colnocomputed]
    end
    item[KEY_MARGINNO_COMPUTED] = marginno

  end

end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Computing vertical positions}
%
%
%
% \subsubsection{Auxiliary functions}
%
% \begin{macro}[int]{get_y_item_top}
%   Return the \(y\)-coordinate of the top of the item described by \luavar{item_data}.
%    \begin{macrocode}
local function get_y_item_top(item_data)
  return item_data[KEY_YPOS]
         + item_data[KEY_YSHIFT_COMPUTED]
         + item_data[KEY_HEIGHT]
end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{get_y_item_bottom}
%   Return the \(y\)-coordinate of the bottom of the item described by \luavar{item_data}.
%    \begin{macrocode}
local function get_y_item_bottom(item_data)
  return item_data[KEY_YPOS]
         - item_data[KEY_DEPTH]
         + item_data[KEY_YSHIFT_COMPUTED]
end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{get_ysep_list}
%   Calculate the separation to be used between adjacent marginal content items as described in
%   \luavar{item_data_list}. The list is assumed to be sorted so that items are in the order they should appear on the
%   page, top to bottom.
%
%   The idea is that we have the following arrangement for \(i = 1,\ldots,\luavar{\#item_data_list}\):
%   {
%     \null~~~~~~\(\vdots\)\\
%     \null~~~~\luavar{item_data_list[i]}\\
%     \null~~~~~~\luavar{ysep_list[i]}\\
%     \null~~~~\luavar{item_data_list[i+1]}\\
%     \null~~~~~~\(\vdots\)\\
%   }
%   Also set \luavar{ysep_list[0]} and \luavar{ysep_list[\#item_data_list]} to 0, to avoid checking when these values
%   are accessed (although they are not used).
%    \begin{macrocode}
local function get_ysep_list(item_data_list)

  local ysep_list = {}

  ysep_list[0] = 0
  for i=1,#item_data_list-1 do
    ysep_list[i] = math.max(
                     item_data_list[i][KEY_YSEP_BELOW],
                     item_data_list[i+1][KEY_YSEP_ABOVE]
                   )
  end
  ysep_list[#item_data_list] = 0

  return ysep_list

end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Computing \val{optfixed} enabled}
%
% \begin{macro}[int]{compute_items_vertical_optfixed_enabled}
%   For every \luavar{item_data} in \luavar{item_data_list} describing an item of type \luavar{TYPE_OPTFIXED}, check
%   for a clash with an item of type \luavar{TYPE_FIXED}. If so, set \luavar{item_data[KEY_ENABLED_COMPUTED]} to
%   \luavar{false}. Every item described in \luavar{item_data_list} is assumed to be on the same page and to have
%   \luavar{KEY_YSHIFT} set to the default.
%    \begin{macrocode}
local function compute_items_vertical_optfixed_enabled(item_data_list)

  local optfixed_item_data_list = {}
  local fixed_item_data_list = {}

  for _,item_data in pairs(item_data_list) do
    if item_data[KEY_TYPE] == TYPE_OPTFIXED then
      optfixed_item_data_list[#optfixed_item_data_list+1] = item_data
    elseif item_data[KEY_TYPE] == TYPE_FIXED then
      fixed_item_data_list[#fixed_item_data_list+1] = item_data
    end
  end

  for _,optfixed_item_data in pairs(optfixed_item_data_list) do
    local optfixed_y_item_top = get_y_item_top(optfixed_item_data)
    local optfixed_y_item_bottom = get_y_item_bottom(optfixed_item_data)

    for _,fixed_item_data in pairs(fixed_item_data_list) do
      local fixed_y_item_top = get_y_item_top(fixed_item_data)
      local fixed_y_item_bottom = get_y_item_bottom(fixed_item_data)

      if (
        (
          (fixed_y_item_bottom - optfixed_y_item_top)
          <
          math.max(
            fixed_item_data[KEY_YSEP_BELOW],
            optfixed_item_data[KEY_YSEP_ABOVE]
          )
        )
        and
        (
          (optfixed_y_item_bottom - fixed_y_item_top)
          <
          math.max(
            optfixed_item_data[KEY_YSEP_BELOW],
            fixed_item_data[KEY_YSEP_ABOVE]
          )
        )
      ) then
        optfixed_item_data[KEY_ENABLED_COMPUTED] = false
        break
      end
    end
  end

end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Computing vertical adjustment}
%
% \begin{macro}[int]{compute_items_vertical_adjustment}
%   For every \luavar{item_data} in \luavar{item_data_list}, compute the field relevant to vertical positioning,
%   namely \luavar{KEY_YSHIFT_COMPUTED}, based on the layout information in \luavar{page_data}. Every item described
%   in \luavar{item_data_list} is assumed to be on the same page and to have \luavar{KEY_YSHIFT} set to the default,
%   and the list is assumed to be sorted so that items are in the order they should appear on the page, top to bottom.
%    \begin{macrocode}
local function compute_items_vertical_adjustment(item_data_list,page_data)
%    \end{macrocode}
%   Immediately return if \luavar{item_data_list} is empty, to avoid edge cases
%    \begin{macrocode}
  if #item_data_list == 0 then
    return
  end

  local ysep_list = get_ysep_list(item_data_list)
%    \end{macrocode}
%   \textit{First pass of computation (downward).} \luavar{y_limit_above} will always be the highest \(y\)-coordinate
%   at which the top of next item below can appear.
%    \begin{macrocode}
  local y_limit_above = (
    page_data[KEY_VOFFSET]
    + page_data[KEY_PAGEHEIGHT]
    - item_data_list[1][KEY_YSEP_PAGE_TOP]
  )

  for i=1,#item_data_list do
    local item_data = item_data_list[i]

    local y_item_top = get_y_item_top(item_data)

    if y_item_top > y_limit_above then
      if item_data[KEY_TYPE] == TYPE_NORMAL then
        item_data[KEY_YSHIFT_COMPUTED] = item_data[KEY_YSHIFT_COMPUTED]
                                         + (y_limit_above - y_item_top)
      end
    end

    y_limit_above = get_y_item_bottom(item_data) - ysep_list[i]
  end
%    \end{macrocode}
%   \textit{Second pass of computation (upward)}. \luavar{y_limit_below} will always be the lowest \(y\)-coordinate at
%   which the bottom of next item above can appear.
%    \begin{macrocode}
  local y_limit_below = (
    page_data[KEY_VOFFSET]
    + item_data_list[#item_data_list][KEY_YSEP_PAGE_BOTTOM]
  )

  for i=#item_data_list,1,-1 do
    local item_data = item_data_list[i]

    local y_item_bottom = get_y_item_bottom(item_data)

    if y_item_bottom < y_limit_below then
      if item_data[KEY_TYPE] == TYPE_NORMAL then
        item_data[KEY_YSHIFT_COMPUTED] = item_data[KEY_YSHIFT_COMPUTED]
                                         + (y_limit_below - y_item_bottom)
      end
    end

    y_limit_below = get_y_item_top(item_data) + ysep_list[i-1]
  end

end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Checking vertical adjustment}
%
% Messages to use when checking results of vertical adjustment.
%    \begin{macrocode}
local ITEM_PASSED_YSEP_PAGE_TOP_MESSAGES = {
  [TYPE_NORMAL] = 'Moveable item > ysep page top',
  [TYPE_FIXED] = 'Topmost fixed item > ysep page top',
  [TYPE_OPTFIXED] = 'Topmost optfixed item > ysep page top',
}
local ITEM_CLASH_MESSAGES = {
  [TYPE_NORMAL] = {
    [TYPE_NORMAL] = 'moveable items'
                    .. ' (this shouldn\'t happen)',
    [TYPE_FIXED] = 'moveable item above fixed item',
    [TYPE_OPTFIXED] = 'moveable item above optfixed item',
  },
  [TYPE_FIXED] = {
    [TYPE_NORMAL] = 'moveable item below fixed item',
    [TYPE_FIXED] = 'fixed items',
    [TYPE_OPTFIXED] = 'fixed item above optfixed item '
                      .. '(this shouldn\'t happen)',
  },
  [TYPE_OPTFIXED] = {
    [TYPE_NORMAL] = 'moveable items below optfixed item',
    [TYPE_FIXED] = 'fixed item below optfixed item '
                   .. '(this shouldn\'t happen)',
    [TYPE_OPTFIXED] = 'optfixed items '
                      .. '(this shouldn\'t happen)',
  },
}
local ITEM_PASSED_YSEP_PAGE_BOTTOM_MESSAGE = {
  [TYPE_NORMAL] = 'Moveable item < ysep page bottom',
  [TYPE_FIXED] = 'Bottommost fixed item < ysep page bottom',
  [TYPE_OPTFIXED] = 'Bottommost optfixed item < ysep page bottom',
}
%    \end{macrocode}
%
% \begin{macro}[int]{check_items_vertical}
%   For the items described by the item_data in \luavar{item_data_list}, check whether any clash or fail to obey
%   \key{ysep page top} or \key{ysep page bottom}. If so, write messages to \luavar{PROBLEM_REPORT_TABLE}.
%    \begin{macrocode}
local function check_items_vertical(item_data_list,page_data)
%    \end{macrocode}
%   Immediately return if item_data_list is empty, to avoid edge cases
%    \begin{macrocode}
  if (#item_data_list) == 0 then
    return
  end

  local ysep_list = get_ysep_list(item_data_list)

  local item_data

%    \end{macrocode}
%   If any item fails to obey \key{ysep page top}, the first one in the list does.
%    \begin{macrocode}
  item_data = item_data_list[1]
  if (
       get_y_item_top(item_data) > page_data[KEY_VOFFSET]
                                 + page_data[KEY_PAGEHEIGHT]
                                 - item_data[KEY_YSEP_PAGE_TOP]
  ) then
    table.insert(
      PROBLEM_REPORT_TABLE,
      get_data_page_number(item_data)
      .. ' ' .. ITEM_PASSED_YSEP_PAGE_TOP_MESSAGES[item_data[KEY_TYPE]]
    )
  end

  for i=2,#item_data_list do
    local item_data = item_data_list[i]
    local prev_item_data = item_data_list[i-1]
    if (
      get_y_item_top(item_data) > get_y_item_bottom(prev_item_data)
                                  - ysep_list[i-1]
    ) then
      table.insert(
        PROBLEM_REPORT_TABLE,
        get_data_page_number(item_data)
        .. ' Clash: ' ..
        ITEM_CLASH_MESSAGES[prev_item_data[KEY_TYPE]][item_data[KEY_TYPE]]
      )
    end
  end
%    \end{macrocode}
%   If any item fails to obey \key{ysep page bottom}, the last one in the list does.
%    \begin{macrocode}
  item_data = item_data_list[#item_data_list]
  if (
    get_y_item_bottom(item_data) < page_data[KEY_VOFFSET]
                                   + item_data[KEY_YSEP_PAGE_BOTTOM]
  ) then
    table.insert(
      PROBLEM_REPORT_TABLE,
      get_data_page_number(item_data)
      .. ' ' .. ITEM_PASSED_YSEP_PAGE_BOTTOM_MESSAGE[item_data[KEY_TYPE]]
    )
  end

end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Core vertical position computation}
%
% \begin{macro}[int]{compute_items_vertical}
%   For every \luavar{item_data} in \luavar{item_data_list}, compute the field relevant to vertical positioning,
%   namely \luavar{KEY_YSHIFT_COMPUTED}, based on the layout information in \luavar{page_data}. This may involve
%   setting the field \luavar{KEY_ENABLED_COMPUTED} to false. In such a case, the relevant item_data is removed from
%   \luavar{item_data_list}.
%    \begin{macrocode}
local function compute_items_vertical(item_data_list,page_data)
%    \end{macrocode}
%   Set \luavar{KEY_YSHIFT_COMPUTED} of each \luavar{item_data} to the user-supplied value.
%    \begin{macrocode}
  for i=1,#item_data_list do
    local item_data = item_data_list[i]

    item_data[KEY_YSHIFT_COMPUTED] = item_data[KEY_YSHIFT]
  end
%    \end{macrocode}
%   Decide which items of \luavar{TYPE_OPTFIXED} are to be disabled.
%    \begin{macrocode}
  compute_items_vertical_optfixed_enabled(item_data_list)
%    \end{macrocode}
%   Strip any \luavar{item_data} with \luavar{KEY_ENABLED_COMPUTED} set to false from \luavar{item_data_list}.
%    \begin{macrocode}
  list_filter(item_data_list,function(item_data)
    return item_data[KEY_ENABLED_COMPUTED]
  end)
%    \end{macrocode}
%   Sort \luavar{item_data_list} according to the stored position from top to bottom and left to right on the page,
%   resolving ties using \luavar{KEY_ITEMNO}.
%    \begin{macrocode}
  table.sort(
    item_data_list,
    function(left,right)
      local y_diff = left[KEY_YPOS] - right[KEY_YPOS]

      if y_diff > 0 then
        return true
      elseif y_diff < 0 then
        return false
      end

      local x_diff = left[KEY_XPOS] - right[KEY_XPOS]

      if x_diff < 0 then
        return true
      elseif x_diff > 0 then
        return false
      end

      return (left[KEY_ITEMNO] < right[KEY_ITEMNO])
    end
  )

  compute_items_vertical_adjustment(item_data_list,page_data)

  check_items_vertical(item_data_list,page_data)

end
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}[int]{compute_items}
%   For every item represented in \luavar{ITEM_DATA_MAIN_TABLE}, use the \luavar{page_data} stored in
%   \luavar{PAGE_DATA_MAIN_TABLE} to compute the item_data values necessary to place the item correctly on the page,
%   namely those indexed by: \luavar{KEY_COLNO_COMPUTED}, \luavar{KEY_XSHIFT_COMPUTED}, \luavar{KEY_YSHIFT_COMPUTED},
%   \luavar{KEY_SIDE_COMPUTED}, \luavar{KEY_ENABLED_COMPUTED}.
%    \begin{macrocode}
local function compute_items()
%    \end{macrocode}
%   Compute the maximum abspageno, which will be the last page of the document on which a item appears.
%    \begin{macrocode}
  local max_abspageno = 0

  for k,v in pairs(ITEM_DATA_MAIN_TABLE) do
    max_abspageno = math.max(v[KEY_ABSPAGENO],max_abspageno)
  end
%    \end{macrocode}
%   \luavar{per_abspage_item_data_list} will be a list indexed by absolute page numbers. Each entry will be a
%   list (possibly empty) of \luavar{item_data} describing the items that appear on the corresponding page.
%    \begin{macrocode}
  local per_abspage_item_data_list = {}
%    \end{macrocode}
%   Prepare \luavar{per_abspage_item_data_list} by making each entry an empty list, then fill it from
%   \luavar{ITEM_DATA_MAIN_TABLE}.
%    \begin{macrocode}
  for i=1,max_abspageno do
    per_abspage_item_data_list[i] = {}
  end
  for _,item_data in pairs(ITEM_DATA_MAIN_TABLE) do
    local temp_table = per_abspage_item_data_list[item_data[KEY_ABSPAGENO]]
    temp_table[#temp_table+1] = item_data
  end
%    \end{macrocode}
%   \luavar{per_abspage_item_data_list} will be a list indexed by abssolute page numbers. Each entry will be a
%   \luavar{page_data} describing the corresponding page. Usually multiple entries will be the same
%   \luavar{page_data}: in the loop, \luavar{pagedatano} will be the index of the last entry in
%   \luavar{PAGE_DATA_MAIN_TABLE} with \luavar{KEY_ABSPAGENO} value less than or equal to \luavar{abspageno}. (There
%   may be several such entries in \luavar{PAGE_DATA_MAIN_TABLE} because \cs{marginalianewgeometry} may have been
%   called multiple times on the same page.) Note that \luavar{PAGE_DATA_MAIN_TABLE[0]} is available even if there was
%   no data in the \file{.aux} file, because the defaults were stored by \luafunc{store_default_page_data}.
%    \begin{macrocode}
  local per_abspage_page_data_list = {}
%    \end{macrocode}
%    \begin{macrocode}
  local pagedatano = 0
  for abspageno = 1,max_abspageno do
%    \end{macrocode}
%    \begin{macrocode}
    while (
      PAGE_DATA_MAIN_TABLE[pagedatano+1] ~= nil
      and
      PAGE_DATA_MAIN_TABLE[pagedatano+1][KEY_ABSPAGENO] == abspageno
    ) do
      pagedatano = pagedatano+1
    end
    per_abspage_page_data_list[abspageno] = PAGE_DATA_MAIN_TABLE[pagedatano]
  end
%    \end{macrocode}
%   Iterate through all pages and perform the necessary computations.
%    \begin{macrocode}
  for abspageno=1,#per_abspage_item_data_list do
    local current_page_data = per_abspage_page_data_list[abspageno]
    local current_page_item_data_list = per_abspage_item_data_list[abspageno]
%    \end{macrocode}
%     First, compute the horizontal positions, which includes sorting items into columns in two-column mode.
%    \begin{macrocode}
    compute_items_horizontal(current_page_item_data_list,current_page_data)
%    \end{macrocode}
%     Sort the items into sublists corresponding to the margins in which they are located.
%    \begin{macrocode}
    local current_page_item_data_sublists = {}

    for i=0,5 do
      current_page_item_data_sublists[i] = {}
    end

    for _,item_data in pairs(current_page_item_data_list) do
      table.insert(
        current_page_item_data_sublists[item_data[KEY_MARGINNO_COMPUTED]],
        item_data
      )
    end
%    \end{macrocode}
%     Compute vertical positons for each sublist.
%    \begin{macrocode}
    for i=0,5 do
      compute_items_vertical(
        current_page_item_data_sublists[i],
        current_page_data
      )
    end
  end
end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Passing \luavar{item_data} back to \LaTeX}
%
% \begin{macro}[int]{load_item_data}
%   Set the relevant \LaTeX\ counter and dimension variables to the values computed for \luavar{itemno}.
%    \begin{macrocode}
local function load_item_data(itemno)

  item = ITEM_DATA_MAIN_TABLE[tonumber(itemno)]
  if item == nil then
    item = ITEM_DATA_DEFAULTS
  end

  tex.count['l__marginalia_page_int'] = item[KEY_PAGENO]
  tex.count['l__marginalia_column_computed_int'] = item[KEY_COLNO_COMPUTED]
  tex.dimen['l__marginalia_xshift_computed_dim'] = item[KEY_XSHIFT_COMPUTED]
  tex.dimen['l__marginalia_yshift_computed_dim'] = item[KEY_YSHIFT_COMPUTED]
  tex.count['l__marginalia_side_computed_int'] = item[KEY_SIDE_COMPUTED]
  tex.count['l__marginalia_marginno_computed_int']
    = item[KEY_MARGINNO_COMPUTED]
  if item[KEY_ENABLED_COMPUTED] then
    tex.count['l__marginalia_enabled_computed_int'] = 1
  else
    tex.count['l__marginalia_enabled_computed_int'] = 0
  end

end
%    \end{macrocode}
% \end{macro}
%
%
%
% \subsection{Export public functions}
%
% Finally, make available the functions that will be called from \LaTeX\ using \cs{lua_now:n} and \cs{lua_now:e}.
%    \begin{macrocode}
marginalia = marginalia or {}
marginalia.store_default_page_data = store_default_page_data
marginalia.store_page_data = store_page_data
marginalia.check_page_data = check_page_data

marginalia.store_item_data = store_item_data
marginalia.check_item_data = check_item_data

marginalia.compute_items = compute_items

marginalia.load_item_data = load_item_data

marginalia.write_problem_report = write_problem_report

marginalia.write_page_change_report = write_page_change_report
marginalia.write_item_change_report = write_item_change_report

marginalia.set_binding_left = set_binding_left
%    \end{macrocode}
%
%
%
%    \begin{macrocode}
%</lua>
%    \end{macrocode}

%
%
%
% \clearpage
% \end{implementation}
%
%
%
% \iffalse
%<*metadriver>
\input{marginalia.dtx}
%</metadriver>
% \fi
